Real-time estimation of zero crossings of sampled signals for timing using cubic spline interpolation

[EN] A scheme is proposed for hardware estimation of the location of zero crossings of sampled signals with sub-sample resolution for timing applications, that consists in interpolating the signal with a cubic spline near the zero crossing and then finding the root of the resulting polynomial. An iterative algorithm based on the bisection method is presented that obtains one bit of the result per step and admits an efficient FPGA implementation using fixed-point representation. In particular, the root estimation iteration involves only two additions, and the initial values can be obtained from FIR filters with certain symmetry properties. It is shown that this allows online, real-time estimation of timestamps in free-running sampling detector systems with improved accuracy with respect to the more common linear interpolation. The method is evaluated with simulations using ideal and real timing signals and estimates are given for the resource usage and speed of its implementation.This work was supported by the Generalitat Valenciana, Spain, under Grant PROMETEOII/2014/019.Aliaga, RJ. (2017). Real-time estimation of zero crossings of sampled signals for timing using cubic spline interpolation. IEEE Transactions on Nuclear Science. 64(8):2414-2422. https://doi.org/10.1109/TNS.2017.27211032414242264