Laser Assisted Solution Synthesis of High Performance Graphene Supported Electrocatalysts

This is the final version. Available on open access from Wiley via the DOI in this recordSimple, yet versatile, methods to functionalize graphene flakes with metal (oxide) nanoparticles are in demand, particularly for the development of advanced catalysts. Herein, we report a laserassisted, continuous, solution route for the simultaneous reduction and modification of graphene oxide with catalytic nanoparticles. Electrochemical graphene oxide (EGO) was used as both the starting material and electron-hole pair source due to its low degree of oxidation, which imparts structural integrity and an ability to withstand photo-degradation. Simply illuminating a stream containing EGO and metal salt precursor solutions(e.g. H2PtCl6 or RuCl3) with a 248 nm wavelength laser produced reduced EGO (rEGO, oxygen content 4.0 at.%) flakes decorated with Pt (~2.0 nm) or RuO2 (~2.8 nm) nanoparticles. The RuO2-rEGO flakes exhibited superior catalytic activity for the oxygen evolution reaction, requiring a small overpotential of 225 mV to reach a current density of 10 mA cm−2 . Whereas, the Pt-rEGO flakes shows significantly enhanced mass activity for the hydrogen evolution reaction and a similar performance for oxygen reduction reaction compared to a commercial 20% Pt/C catalyst. This simple production method was also used to deposit PtPd alloy and MnOx nanoparticles on rEGO , demonstrating its versatility in synthesizing functional nanoparticle-modified graphene materials.University of ManchesterEngineering and Physical Sciences Research Council (EPSRC)European Union Horizon 202