This thesis investigates the effect of the laboratory compactive effort on resistance to rutting and cracking of hot-mix asphalt mixtures in Texas. With the objective of improving fatigue resistance of Texas’ asphalt mixtures, two procedures, based on a performance-related approach geared towards determining revised N-design compaction levels to increase binder contents in asphalt mixtures without compromising rutting performance, have been developed: 1) weighted combinations of performance curves, and 2) reliability-based analysis of performance. The experimental design has been devised to investigate the performance characteristics of Texas’ asphalt mixtures designed using the revised N-design. The procedure found strong support for decre...
Asphalt stabilized bases in Texas are usually designed and constructed as per Item 292, Asphalt Tre...
The Superpave design procedure was established to provide a more representative design methodology a...
At present, there is no accepted standard by highway authorities on the compaction procedures of 100...
Most departments of transportation, including Indiana’s, currently use the Superpave mixture design ...
9781622603893Final reportPDFTech ReportFHWA/IN/JTRP-2015/25SPR-3624Air voidsAsphalt mixturesCompacti...
US Transportation Collection2020PDFTech ReportHuang, BaoshanPolaczyk, Pawel AndrzejHu, WeiUniversity...
95 p.In this study several asphalt mixtures were produced using four different aggregate sources, di...
A critical step in the design of asphalt mixtures is laboratory compaction. Laboratory compaction sh...
AbstractThe number of design gyrations (Ndes) is an extremely important parameter in the asphalt con...
00770508096523102X1998PDFResearch PaperAsphalt mixturesCompactionRuttingStrength of materialsSuperpa...
The objective of this study was to develop a guide for the Washoe County Nevada, Regional Transporta...
Compaction technique used in Marshall design does not model the process of actual rolling procedures...
Optimizing the asphalt mixture design process to produce mixes that balance excellent performance wi...
This report presents findings on the effect of conditioning time on the volumetric properties of Sup...
The only way to estimate the future performance of any asphalt pavement is reached through the labor...
Asphalt stabilized bases in Texas are usually designed and constructed as per Item 292, Asphalt Tre...
The Superpave design procedure was established to provide a more representative design methodology a...
At present, there is no accepted standard by highway authorities on the compaction procedures of 100...
Most departments of transportation, including Indiana’s, currently use the Superpave mixture design ...
9781622603893Final reportPDFTech ReportFHWA/IN/JTRP-2015/25SPR-3624Air voidsAsphalt mixturesCompacti...
US Transportation Collection2020PDFTech ReportHuang, BaoshanPolaczyk, Pawel AndrzejHu, WeiUniversity...
95 p.In this study several asphalt mixtures were produced using four different aggregate sources, di...
A critical step in the design of asphalt mixtures is laboratory compaction. Laboratory compaction sh...
AbstractThe number of design gyrations (Ndes) is an extremely important parameter in the asphalt con...
00770508096523102X1998PDFResearch PaperAsphalt mixturesCompactionRuttingStrength of materialsSuperpa...
The objective of this study was to develop a guide for the Washoe County Nevada, Regional Transporta...
Compaction technique used in Marshall design does not model the process of actual rolling procedures...
Optimizing the asphalt mixture design process to produce mixes that balance excellent performance wi...
This report presents findings on the effect of conditioning time on the volumetric properties of Sup...
The only way to estimate the future performance of any asphalt pavement is reached through the labor...
Asphalt stabilized bases in Texas are usually designed and constructed as per Item 292, Asphalt Tre...
The Superpave design procedure was established to provide a more representative design methodology a...
At present, there is no accepted standard by highway authorities on the compaction procedures of 100...