The strength of porous pure titanium (Ti) scaffold decreases dramatically with the introduction of porosity and might become lower than that of natural bone when with high porosity. To simultaneously meet the requirements of low-elastic modulus and appropriate strength for implant materials, it is necessary to develop new biocompatible Ti-based composites that are stronger than those currently available while providing low-elastic modulus and adequate strength when they are scaffolded into a porous structure. In this study, new particulatereinforced Ti-based composites with nanoscale oxide particles of SiO2 and ZrO2 were prepared using a powder metallurgical method. The strengths of the new particulatereinforced titanium composites were fou...
Titanium (Ti) based porous alloys have been widely used as orthopedic implants. However, the success...
The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range bet...
The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range bet...
The mechanical property of porous pure titanium (Ti) scaffold with high porosity might become poorer...
The mechanical property of porous pure titanium (Ti) scaffold with high porosity might become poorer...
Titanium/silica (Ti/SiO2) composites are fabricated using powder metallurgy (P/M). Nanoscale biocomp...
Bone-like low elastic modulus micro-porous titanium (Ti) and titanium-zirconia (Ti-ZrO2) nanocomposi...
Synthetic scaffolds are a highly promising new approach to replace both autografts and allografts to...
Synthetic scaffolds are a highly promising new approach to replace both autografts and allografts to...
Ceramic/metal composites, cermets, arise from the idea to combine the dissimilar properties in the p...
In this study, titanium (Ti) and titanium-zirconium (TiZr) alloy samples fabricated through powder m...
AbstractThe strength of titanium scaffolds with the introduction of high porosity decreases dramatic...
Ceramic/metal composites, cermets, arise from the idea to combine the dissimilar properties in the p...
Titanium (Ti) and Ti-6 Aluminium-4 Vanadium alloys are the most common materials in implants composi...
Titanium–strontia (Ti–SrO) metal matrix composites (MMCs) with 0, 1, 3 and 5% (weight ratio) of SrO ...
Titanium (Ti) based porous alloys have been widely used as orthopedic implants. However, the success...
The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range bet...
The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range bet...
The mechanical property of porous pure titanium (Ti) scaffold with high porosity might become poorer...
The mechanical property of porous pure titanium (Ti) scaffold with high porosity might become poorer...
Titanium/silica (Ti/SiO2) composites are fabricated using powder metallurgy (P/M). Nanoscale biocomp...
Bone-like low elastic modulus micro-porous titanium (Ti) and titanium-zirconia (Ti-ZrO2) nanocomposi...
Synthetic scaffolds are a highly promising new approach to replace both autografts and allografts to...
Synthetic scaffolds are a highly promising new approach to replace both autografts and allografts to...
Ceramic/metal composites, cermets, arise from the idea to combine the dissimilar properties in the p...
In this study, titanium (Ti) and titanium-zirconium (TiZr) alloy samples fabricated through powder m...
AbstractThe strength of titanium scaffolds with the introduction of high porosity decreases dramatic...
Ceramic/metal composites, cermets, arise from the idea to combine the dissimilar properties in the p...
Titanium (Ti) and Ti-6 Aluminium-4 Vanadium alloys are the most common materials in implants composi...
Titanium–strontia (Ti–SrO) metal matrix composites (MMCs) with 0, 1, 3 and 5% (weight ratio) of SrO ...
Titanium (Ti) based porous alloys have been widely used as orthopedic implants. However, the success...
The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range bet...
The improvement of bone ingrowth into prosthesis and enhancement of the combination of the range bet...