A microfabricated steel and glass radiation detector with inherent wireless signaling

This paper describes an investigation of the performance compromises imposed by a manufacturing approach that utilizes lithographic micromachining processes to fabricate a wireless beta/gamma radiation detector. The device uses in-package assembly of stainless steel electrodes and glass spacers. These elements are micromachined using photochemical etching and powder blasting, respectively. The detector utilizes a commercial, TO-5 package that is hermetically sealed at 760 Torr with an Ar fill-gas. Gas microdischarges between the electrodes, which are initiated by the radiation, transmit wideband wireless signals. The detector diameter and height are 9 and 9.6 mm, respectively, and it weighs 0.97 g. The device performance has been characterized using various sealed, radioisotope sources, e.g., 30–99 µCi from 137 Cs (which is a beta and gamma emitter) and 0.1 µCi from 90 Sr (which is a pure beta emitter). It has a measured output of >15.5 counts s _1 when in close proximity to 99 µCi from 137 Cs. The wireless signaling spans 1.25 GHz at receiving antenna-to-detector distances >89 cm, when in close proximity to a 0.1 µCi 90 Sr source. The estimated intrinsic detection efficiency (i.e. with the background rate subtracted) is 3.34% as measured with the biasing arrangement described in the paper.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/90792/1/0960-1317_21_1_015003.pd