Development of semiconductor detectors for fast neutron radiography

A high-energy neutron detector has been developed using a semiconductor diode fabricated from bulk gallium arsenide wafers with a polyethylene neutron converter layer. Typical thickness of the diode layer is 250 to 300 μm with bias voltages of 30 to 150 volts. Converter thicknesses up to 2030 μm have been tested. GaAs neutron detectors offer many advantages over existing detectors including positional information, directional dependence, gamma discrimination, radiation hardness, and spectral tailoring. Polyethylene-coated detectors have been shown to detect 14 MeV neutrons directly from a D-T neutron generator without interference from gamma rays or scattered neutrons. An array of small diode detectors can be assembled to perform fast neutron radiography with direct digital readout and real-time display of the image produced. In addition, because the detectors are insensitive to gamma rays and low energy neutrons, highly radioactive samples (such as spent nuclear fuel or transuranic waste drums) could be radiographed. © 2001 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87673/2/1118_1.pd