Efficient simulation of hydraulic fractured wells in unconventional reservoirs

International audienceReservoir simulators remain essential tools for improved reservoir management in order to optimize hydraulic fracturing design in unconventional low permeability reservoirs. However, the commonly-used simulator requires too much computational efforts for the description of local phenomena in the vicinity of the hydraulic fractures, and is practically infeasible for field applications, due to large number of gridblocks involved in a full-field simulation with many multi-fractured complex wells. Therefore, coarse grid simulations have been widely used, but the techniques for the coarse grid simulation of fractured wells need to be improved. In this paper, we present efficient numerical methods to handle both long-term well performance and transient behaviour simulations for hydraulic fractured wells in unconventional reservoirs with a coarse grid. To simulate correctly the long-term behavior, transimissibilities around the fracture and the connection factor between a fractured block and the fracture are computed, based on a (pseudo)-steady-state near-fracture solution. This approach provides not only 2 an accurate long-term well production calculation, but also a correct pressure distribution in the near-fracture region. In unconventional reservoirs, the transient effects cannot be ignored, due to the very low reservoir permeability and near-well/near-fracture physical processes such as fracturing fluid induced formation damage. In order to handle the transient effect, the coupled modeling technique is used, and its efficiency is demonstrated with a tight-gas reservoir