Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65973/1/j.1151-2916.1999.tb01846.x.pd
The formation of dense SiC-matrix composites utilizing additions of AlN and Al$\sb2$O$\sb3$ were stu...
Nanocomposites have been widely used in a multitude of applications in electronics and structural co...
We show the feasibility of introducing a dispersion of a refractory ceramic phase into metals by sti...
AlN–SiC-particle-reinforced composites have been pre-pared at £ 1400°C using submicrometer AlN, −325...
An overview of two approaches to the formation of ceramic composite matrices from polymeric precurso...
Thesis (Ph.D.)--University of Washington, 2015Polymer-derived ceramics (PDCs) provides a unique proc...
A polycarbosilane-based SiC-precursor with high ceramic yield (75 % by weight) was used for preparat...
Silicon carbide (SiC) is an important ceramic, most commonly used because of its excellent propertie...
Aluminum nitride (AlN)-silicon carbide (SiC) nanocomposite powders were prepared by the nitridation ...
Graduation date: 2011Silicon carbide (SiC) and aluminum nitride (AlN) exhibit a combination of therm...
peer-reviewedThe full text of this article will not be available in ULIR until the embargo expires o...
High-performance ceramics are often used for reusable spacecraft Thermal Protection Systems (TPS). P...
In this thesis, a novel in-situ method for incorporating nanoscale ceramic particles into metal has ...
The current, commercial, organosilicon polymer derived, silicon carbide (SiC) based fibers, e.g. Nic...
[[abstract]]The present paper reports a review on study of various processing routes and related mec...
The formation of dense SiC-matrix composites utilizing additions of AlN and Al$\sb2$O$\sb3$ were stu...
Nanocomposites have been widely used in a multitude of applications in electronics and structural co...
We show the feasibility of introducing a dispersion of a refractory ceramic phase into metals by sti...
AlN–SiC-particle-reinforced composites have been pre-pared at £ 1400°C using submicrometer AlN, −325...
An overview of two approaches to the formation of ceramic composite matrices from polymeric precurso...
Thesis (Ph.D.)--University of Washington, 2015Polymer-derived ceramics (PDCs) provides a unique proc...
A polycarbosilane-based SiC-precursor with high ceramic yield (75 % by weight) was used for preparat...
Silicon carbide (SiC) is an important ceramic, most commonly used because of its excellent propertie...
Aluminum nitride (AlN)-silicon carbide (SiC) nanocomposite powders were prepared by the nitridation ...
Graduation date: 2011Silicon carbide (SiC) and aluminum nitride (AlN) exhibit a combination of therm...
peer-reviewedThe full text of this article will not be available in ULIR until the embargo expires o...
High-performance ceramics are often used for reusable spacecraft Thermal Protection Systems (TPS). P...
In this thesis, a novel in-situ method for incorporating nanoscale ceramic particles into metal has ...
The current, commercial, organosilicon polymer derived, silicon carbide (SiC) based fibers, e.g. Nic...
[[abstract]]The present paper reports a review on study of various processing routes and related mec...
The formation of dense SiC-matrix composites utilizing additions of AlN and Al$\sb2$O$\sb3$ were stu...
Nanocomposites have been widely used in a multitude of applications in electronics and structural co...
We show the feasibility of introducing a dispersion of a refractory ceramic phase into metals by sti...
DOI
Add to ORKG