Add to ORKGIn this work a physically based model describing the anelastic behaviour and nonlinear unloading in Advanced High Strength Steels (AHSS) is proposed. The model is fitted to the experimental data obtained from uni-axial tests on a dual-phase high strength steel grade (HCT780). The results show a good agreement between the model and the experimental data
It has been widely observed that below the flow stress of a plastically deformed material the stress...
In this paper the evolution of the Young’s Modulus (E) during unloading with plastic deformation has...
MasterThe elastic moduli of four automotive sheet steels were measured during unloading and reloadin...
It has been widely observed that below the yield stress the loading/unloading stress-strain curves o...
It has been widely observed that the loading/unloading behavior of metals which have previously unde...
Finite element (FE) simulations are used extensively during the tool design stage to predict the spr...
DoctorThe present study aims to investigate material plastic behavior of advanced high strength stee...
Advanced high-strength steels (AHSSs) exhibit large, and sometimes anisotropic, springback recovery ...
Advanced High Strength Steels have been extensively used in automotive industry due to their high yi...
In this work, the nonlinear kinematic hardening combined with Voce isotropic hardening was selected ...
The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carri...
The springback phenomenon that occur in thin metal sheets after forming is mainly a stress driven pr...
Materials modeling and numerical formulations were conducted to describe the complex material behavi...
The springback phenomenon is defined as elastic recovery of the stresses produced during the forming...
The formulation of the so-called homogeneous anisotropic hardening (HAH) model, which was originally...
It has been widely observed that below the flow stress of a plastically deformed material the stress...
In this paper the evolution of the Young’s Modulus (E) during unloading with plastic deformation has...
MasterThe elastic moduli of four automotive sheet steels were measured during unloading and reloadin...
It has been widely observed that below the yield stress the loading/unloading stress-strain curves o...
It has been widely observed that the loading/unloading behavior of metals which have previously unde...
Finite element (FE) simulations are used extensively during the tool design stage to predict the spr...
DoctorThe present study aims to investigate material plastic behavior of advanced high strength stee...
Advanced high-strength steels (AHSSs) exhibit large, and sometimes anisotropic, springback recovery ...
Advanced High Strength Steels have been extensively used in automotive industry due to their high yi...
In this work, the nonlinear kinematic hardening combined with Voce isotropic hardening was selected ...
The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carri...
The springback phenomenon that occur in thin metal sheets after forming is mainly a stress driven pr...
Materials modeling and numerical formulations were conducted to describe the complex material behavi...
The springback phenomenon is defined as elastic recovery of the stresses produced during the forming...
The formulation of the so-called homogeneous anisotropic hardening (HAH) model, which was originally...
It has been widely observed that below the flow stress of a plastically deformed material the stress...
In this paper the evolution of the Young’s Modulus (E) during unloading with plastic deformation has...
MasterThe elastic moduli of four automotive sheet steels were measured during unloading and reloadin...