We analyzed the transport of charge carriers across PrBa2Cu3−xGaxO7−δ (PBCGO) barriers as a function of barrier thickness, Ga‐doping level, temperature, and bias voltage. It was found that by Ga doping, the normal state resistance (Rn) of the junctions was systematically increased, while the critical current (Ic) remained constant. We argue that pair transport takes place by direct tunneling, whereas the quasiparticles have access to channels formed by one or more localized states inside the barrier. By Ga doping the I cRn products were increased, up to 8mV at 4.2K for junctions with 8nm thick PrBa2Cu2.6Ga0.4O7−δ barriers
The mechanisms of current passage and the causes of IcRn (critical-current normal-resistance) produc...
We have fabricated M doped (M = Al, Co, Fe, Ga, Ni and Zn) PrBa(2)Cu(3)O(7)(PBCO), i.e. PrBa(2)(Cu(1...
The transport properties of "interface-engineered" edge-type YBa2Cu3O7 Josephson junctions are inves...
We analyzed the transport of charge carriers across PrBa2Cu3−xGaxO7−δ (PBCGO) barriers as a function...
The use of PrBa2Cu3−xGaxO7 barrier material with increased resistivity by Ga doping (x=0; 0.05 and 0...
We have investigated both experimentally and theoretically the normal state resistance and Josephson...
In this contribution we will discuss the charge transport of ramp-type HTS Josephson junctions with ...
Ramp-type Josephson junctions with highly doped PrBa2Cu3-xGaxO7-δ barrier layers (x=0.7, 1.0) have b...
Josephson junctions are the most important active elements in high-temperaturesuperconductor (FITS) ...
The Josephson junction is the most important basic device in active superconductor electronics. Ramp...
The Josephson junction is the most important basic device in active superconductor electronics. Ramp...
Ramp type Josephson junctions have been fabricated using DyBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// as...
Josephson junctions are the most important active elements in high-temperature-superconductor (HTS) ...
In this contribution we will discuss the requirements to be imposed on the barriers of HTS Josephson...
A study of the YBCO/PBCO/YBCO ramp junctions with and without PBCO barrier shows that the Josephson ...
The mechanisms of current passage and the causes of IcRn (critical-current normal-resistance) produc...
We have fabricated M doped (M = Al, Co, Fe, Ga, Ni and Zn) PrBa(2)Cu(3)O(7)(PBCO), i.e. PrBa(2)(Cu(1...
The transport properties of "interface-engineered" edge-type YBa2Cu3O7 Josephson junctions are inves...
We analyzed the transport of charge carriers across PrBa2Cu3−xGaxO7−δ (PBCGO) barriers as a function...
The use of PrBa2Cu3−xGaxO7 barrier material with increased resistivity by Ga doping (x=0; 0.05 and 0...
We have investigated both experimentally and theoretically the normal state resistance and Josephson...
In this contribution we will discuss the charge transport of ramp-type HTS Josephson junctions with ...
Ramp-type Josephson junctions with highly doped PrBa2Cu3-xGaxO7-δ barrier layers (x=0.7, 1.0) have b...
Josephson junctions are the most important active elements in high-temperaturesuperconductor (FITS) ...
The Josephson junction is the most important basic device in active superconductor electronics. Ramp...
The Josephson junction is the most important basic device in active superconductor electronics. Ramp...
Ramp type Josephson junctions have been fabricated using DyBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// as...
Josephson junctions are the most important active elements in high-temperature-superconductor (HTS) ...
In this contribution we will discuss the requirements to be imposed on the barriers of HTS Josephson...
A study of the YBCO/PBCO/YBCO ramp junctions with and without PBCO barrier shows that the Josephson ...
The mechanisms of current passage and the causes of IcRn (critical-current normal-resistance) produc...
We have fabricated M doped (M = Al, Co, Fe, Ga, Ni and Zn) PrBa(2)Cu(3)O(7)(PBCO), i.e. PrBa(2)(Cu(1...
The transport properties of "interface-engineered" edge-type YBa2Cu3O7 Josephson junctions are inves...