Finite deformations of an initially stressed cylindrical shell under internal pressure

International audienceThis paper investigates the large deformations of an extended thick cylindrical tube under internal pressure, with emphasis on the static nonlinear behavior and instabilities of the shell. Thick elastic tubes that undergo large elastic deformations under internal pressure can exhibit novel instabilities. After some deformation, part of the tube becomes highly deformed taking the form of a bulge, while the remainder appears almost unchanged. This local instability phenomenon corresponds to a limit point along the nonlinear equilibrium path. After the onset of these highly nonuniform deformations, the local bulge initially grows with a marked decrease in internal pressure while the rest of the tube unloads. First, a detailed experimental analysis is carried out involving different geometries and initial axial forces and the influence of the axial force and of the internal pressure on the critical pressure is investigated. The shell used in the experiments is composed of an isotropic, homogeneous and hyperelastic rubber, which is modeled as a Mooney–Rivlin incompressible material, described by two elastic constants. These constants are obtained by comparing the experimental and numerical solutions for the shell under axial tension. The governing shell equations are solved numerically using the finite-element method, using the program ABAQUS. The experimental results are, as shown in the paper, in satisfactory agreement with the numerical analysis