Heat capacities have been measured and derived thermodynamic properties calculated for the structurally related US1[middle dot]9 and USe2 phases from 5 to 350[deg]K. Values of the heat capacity (Cp), entropy (S[deg] - S[deg]0) and Gibbs energy function [-(G[deg] - H[deg]0/T] at 298[middle dot]15[deg]K in cal mol-1 [deg]K-1 are 17[middle dot]68, 25[middle dot]91 and 13[middle dot]82 for US1[middle dot]9 and 18[middle dot]92, 31[middle dot]98 and 17[middle dot]86 for USe2, respectively. Schottky-type anomalies are present in US1[middle dot]9; a [lambda]-type thermal anomaly with [Delta]St = 0[middle dot]19 cal mole-1 [deg]K-1 occurs at 13[middle dot]1 [deg]K in USe2.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/32742/1/0000111....
A review of the thermochemical data for the vaporization of the oxides and carbides of uranium was m...
The heat capacities of SmCl3, EuCl3, and GdCl3 have been measured from 5 to 350 K by adiabatic calor...
The heat capacity of triuranium silicide, U3Si, has been measured from 1 to 350 K and its enthalpy d...
Heat capacity measurements and calculations of thermodynamic properties have been carried out for th...
Heat capacities of carefully characterized samples of URu3 and URh3 were measured by adiabatic calor...
The low‐temperature heat capacity of UN was determined by adiabatic calorimetry and found to have a ...
Three precise calorimetric methods, viz., low-temperature adiabatic, high-temperatuare drop, and sol...
The heat capacity (from 8 to 350 K) of UPd3 by adiabatic calorimetry and (from 400 to 900 K) by enth...
The heat contents of high-purity uranium and uranium-fissium alloys containing 3, 5, and 8 wt.% fiss...
The current status of chemical thermodynamics’of the actinide and lanthanide chalcogenides including...
Heat capacities of platinum monosulfide, platinum monotelluride, and palladium monotelluride were me...
We report the experimental heat capacity of γ‐phase Sm2S3 and derived thermophysical properties at s...
Abstract--The heat capacities of uranium diarsenide (UAs2) and uranium diantimonide (USb:), with tet...
Low temperature heat capacities have been measured by adiabatic calorimetry on two phases with compo...
SIGLEAvailable from British Library Document Supply Centre- DSC:9091.9(TP--827) / BLDSC - British Li...
A review of the thermochemical data for the vaporization of the oxides and carbides of uranium was m...
The heat capacities of SmCl3, EuCl3, and GdCl3 have been measured from 5 to 350 K by adiabatic calor...
The heat capacity of triuranium silicide, U3Si, has been measured from 1 to 350 K and its enthalpy d...
Heat capacity measurements and calculations of thermodynamic properties have been carried out for th...
Heat capacities of carefully characterized samples of URu3 and URh3 were measured by adiabatic calor...
The low‐temperature heat capacity of UN was determined by adiabatic calorimetry and found to have a ...
Three precise calorimetric methods, viz., low-temperature adiabatic, high-temperatuare drop, and sol...
The heat capacity (from 8 to 350 K) of UPd3 by adiabatic calorimetry and (from 400 to 900 K) by enth...
The heat contents of high-purity uranium and uranium-fissium alloys containing 3, 5, and 8 wt.% fiss...
The current status of chemical thermodynamics’of the actinide and lanthanide chalcogenides including...
Heat capacities of platinum monosulfide, platinum monotelluride, and palladium monotelluride were me...
We report the experimental heat capacity of γ‐phase Sm2S3 and derived thermophysical properties at s...
Abstract--The heat capacities of uranium diarsenide (UAs2) and uranium diantimonide (USb:), with tet...
Low temperature heat capacities have been measured by adiabatic calorimetry on two phases with compo...
SIGLEAvailable from British Library Document Supply Centre- DSC:9091.9(TP--827) / BLDSC - British Li...
A review of the thermochemical data for the vaporization of the oxides and carbides of uranium was m...
The heat capacities of SmCl3, EuCl3, and GdCl3 have been measured from 5 to 350 K by adiabatic calor...
The heat capacity of triuranium silicide, U3Si, has been measured from 1 to 350 K and its enthalpy d...