Add to ORKGThe material parameters of different sampels have been measured in the frequency range from 8 to 96 GHz. Waveguide measurements and measurements under free space conditions have been carried out for this purpose
This work presents the results of experimental measurements of permittivity and permeability of mate...
With the help of electromagnetic waves in deci-, centi- and millimeter-wave range (microwaves) it is...
AFIT/GE/ENG/06-12 Electromagnetic material characterization is the process of determining the com-pl...
In this contribution, we present a measurement system for material characterization in the millimete...
The material parameters, permittivity and permeability, have been determined for a lot of samples in...
This paper describes the use of line resonators as well as micro strip lines for continuous monitori...
This work is concentrated on the development of laboratory task with a focus on measuring permittivi...
This paper presents a fast, accurate and easy to use measurement method to extract two parameters of...
This chapter deals with the vector network analyzer systems used for the study of the electromagneti...
This pilot study was part of the EMPIR (18SIB09) TEMMT project and was registered as the EURAMET 151...
A recent measurement comparison exercise involving four participating laboratories was undertaken to...
Abstract—In this paper, a new free-space measurement setup at millimeter waves for material characte...
In this paper the material characterization at sub-millimetre wave frequencies facility recently dev...
This paper describes an initial assessment of a commercially available THz material characterization...
This master thesis investigates material characterization by reflection and transmission of electrom...
This work presents the results of experimental measurements of permittivity and permeability of mate...
With the help of electromagnetic waves in deci-, centi- and millimeter-wave range (microwaves) it is...
AFIT/GE/ENG/06-12 Electromagnetic material characterization is the process of determining the com-pl...
In this contribution, we present a measurement system for material characterization in the millimete...
The material parameters, permittivity and permeability, have been determined for a lot of samples in...
This paper describes the use of line resonators as well as micro strip lines for continuous monitori...
This work is concentrated on the development of laboratory task with a focus on measuring permittivi...
This paper presents a fast, accurate and easy to use measurement method to extract two parameters of...
This chapter deals with the vector network analyzer systems used for the study of the electromagneti...
This pilot study was part of the EMPIR (18SIB09) TEMMT project and was registered as the EURAMET 151...
A recent measurement comparison exercise involving four participating laboratories was undertaken to...
Abstract—In this paper, a new free-space measurement setup at millimeter waves for material characte...
In this paper the material characterization at sub-millimetre wave frequencies facility recently dev...
This paper describes an initial assessment of a commercially available THz material characterization...
This master thesis investigates material characterization by reflection and transmission of electrom...
This work presents the results of experimental measurements of permittivity and permeability of mate...
With the help of electromagnetic waves in deci-, centi- and millimeter-wave range (microwaves) it is...
AFIT/GE/ENG/06-12 Electromagnetic material characterization is the process of determining the com-pl...