Add to ORKGhttp://deepblue.lib.umich.edu/bitstream/2027.42/8076/5/bad4579.0001.001.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/8076/4/bad4579.0001.001.tx
Characteristics of non-metallic inclusions, e.g. their number density, size and size distribution, m...
The effects of Mg and Ca on sulfide modification of sulphur steel were studied to elucidate the diff...
The non-metallic inclusions are metallurgical defect always present within the steel bulk. Although ...
Massachusetts Institute of Technology. Dept. of Metallurgy and Materials Science. Thesis. 1970. Sc.D...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 19...
Sulfur is a very important component in steel. Usually is it present as an impurity in commercial st...
The behavior of MnS, a significant non-metallic inclusion in steel with low sulfur content, is poorl...
The characteristics of elongated MnS have a critical effect on fatigue anisotropy and all mechanical...
Removal of inclusions is of greatsignificance to steelmakers and the scientific principles underpinn...
Suitable MnS inclusions in gear steel can significantly improve the steel machinability and reduce t...
International audienceIn this paper, we studied the effect of sulfide ions on the corrosion behavior...
The recycling of steel scrap is becoming more and more developed to save resources and protect the e...
Five linepipe type steels were produced in order to study the effect of calcium and magnesium inject...
PhDMetallurgyUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib...
In this paper, non-quenched and tempered steel was selected to observe sulfide inclusions in as-cast...
Characteristics of non-metallic inclusions, e.g. their number density, size and size distribution, m...
The effects of Mg and Ca on sulfide modification of sulphur steel were studied to elucidate the diff...
The non-metallic inclusions are metallurgical defect always present within the steel bulk. Although ...
Massachusetts Institute of Technology. Dept. of Metallurgy and Materials Science. Thesis. 1970. Sc.D...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 19...
Sulfur is a very important component in steel. Usually is it present as an impurity in commercial st...
The behavior of MnS, a significant non-metallic inclusion in steel with low sulfur content, is poorl...
The characteristics of elongated MnS have a critical effect on fatigue anisotropy and all mechanical...
Removal of inclusions is of greatsignificance to steelmakers and the scientific principles underpinn...
Suitable MnS inclusions in gear steel can significantly improve the steel machinability and reduce t...
International audienceIn this paper, we studied the effect of sulfide ions on the corrosion behavior...
The recycling of steel scrap is becoming more and more developed to save resources and protect the e...
Five linepipe type steels were produced in order to study the effect of calcium and magnesium inject...
PhDMetallurgyUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib...
In this paper, non-quenched and tempered steel was selected to observe sulfide inclusions in as-cast...
Characteristics of non-metallic inclusions, e.g. their number density, size and size distribution, m...
The effects of Mg and Ca on sulfide modification of sulphur steel were studied to elucidate the diff...
The non-metallic inclusions are metallurgical defect always present within the steel bulk. Although ...