Amorphous metal-metalloid powders have been prepared by chemical reduction of Fe2+, Co2+, and Ni2+ ions with potassium borohydride in aqueous solution. The chemical composition of the samples, TM-B-O, varies with the metal and with the preparation steps. The as-prepared Co-B-O and Ni-B-O samples are definitely amorphous, while the Fe-B-O sample mainly consists of bcc α-Fe. Crystallization of the samples through thermal treatment has been investigated by X-ray diffraction. The Co-B-O sample evolves toward fee metallic cobalt accompanied first by metastable o-Co3B and, at high temperature, by t-Co2B. The Ni-B-O sample gives rise to fee metallic Ni and o-Ni3B, which decomposes at higher temperatures. Iron borides are not detected in the therm...
Structural changes during heating or aging in a wide temperature range were exmained with three amor...
Mechanical alloying was performed on elemental cobalt and boron powders in the atomic ratio Co67B33....
Cobalt and boron powder mixtures with differing Co/B ratios were ball milled under high energetic co...
Amorphous metal-metalloid powders have been prepared by chemical reduction of Fez+, Co2+, and Ni2+ ...
Amorphous metal-metalloid powders have been prepared by chemical reduction of Fez+, Co2+, and Ni2+ ...
Ultrafine amorphous transition metal-boron (TM-B, TM = Co, Ni, Fe) powders have been prepared, under...
Ultrafine amorphous transition metal-boron (TM-B, TM = Co, Ni, Fe) powders have been prepared, under...
Ultrafine amorphous transition metal-boron (TM-B, TM = Co, Ni, Fe) powders have been prepared, under...
Amorphous ultra-fine powders in (Fe, Co or Ni)-B, Fe-Co-B, Fe-Ni-B and Co-Ni-B systems were produced...
Fine boride powders, prepared by reactions between sodium or potassium borohydride and aqueous (or a...
X-ray diffraction measurements were carried out to investigate some structural aspects of FeCoB and ...
X-ray diffraction and scanning electron microscopy were used to monitor the mechanical alloying of f...
New type amorphous alloys, whose compositions do not belong to the previous categories, have been fo...
The thermal decomposition of HFe3(CO)9BH4 on glass or aluminum substrates at 175-200°C at pressures ...
The crystallization at 400°C of amorphous thin films formed by the thermal decomposition of HFe3-(CO...
Structural changes during heating or aging in a wide temperature range were exmained with three amor...
Mechanical alloying was performed on elemental cobalt and boron powders in the atomic ratio Co67B33....
Cobalt and boron powder mixtures with differing Co/B ratios were ball milled under high energetic co...
Amorphous metal-metalloid powders have been prepared by chemical reduction of Fez+, Co2+, and Ni2+ ...
Amorphous metal-metalloid powders have been prepared by chemical reduction of Fez+, Co2+, and Ni2+ ...
Ultrafine amorphous transition metal-boron (TM-B, TM = Co, Ni, Fe) powders have been prepared, under...
Ultrafine amorphous transition metal-boron (TM-B, TM = Co, Ni, Fe) powders have been prepared, under...
Ultrafine amorphous transition metal-boron (TM-B, TM = Co, Ni, Fe) powders have been prepared, under...
Amorphous ultra-fine powders in (Fe, Co or Ni)-B, Fe-Co-B, Fe-Ni-B and Co-Ni-B systems were produced...
Fine boride powders, prepared by reactions between sodium or potassium borohydride and aqueous (or a...
X-ray diffraction measurements were carried out to investigate some structural aspects of FeCoB and ...
X-ray diffraction and scanning electron microscopy were used to monitor the mechanical alloying of f...
New type amorphous alloys, whose compositions do not belong to the previous categories, have been fo...
The thermal decomposition of HFe3(CO)9BH4 on glass or aluminum substrates at 175-200°C at pressures ...
The crystallization at 400°C of amorphous thin films formed by the thermal decomposition of HFe3-(CO...
Structural changes during heating or aging in a wide temperature range were exmained with three amor...
Mechanical alloying was performed on elemental cobalt and boron powders in the atomic ratio Co67B33....
Cobalt and boron powder mixtures with differing Co/B ratios were ball milled under high energetic co...