DevelopmentandConstruction of BambooofCleave Machine Semi -automatic .

รายงานวิจัย -- มหาวิทยาลัยเทคโนโลยีราชมงคลพระนคร,พ.ศ2552This Designing and Producing the Bamboo Of Cleave Machine Semi-automatic is Produced in Order to Produce the Machine that help to press the Bamboo which be Able to do Easier than using Workers by Applying the Principle of Pressing Bamboo by Hand and to be the Principle of Producing the Press Bamboo Machines This Machine use AC Motor to be first Power of Machine by Passing the Power through V -bealt to Another Systems. The System is Divided into 3 main sets that are : insert set, Cutting set, and Moving Equipment which Start from inserting the Bamboo into Rolling set that the Roller can Adjust the Distance According to the thick by using Mechanism. Then. Bamboo will be Moved to Cutting set. Slice the Bamboo to be Strip. Finally, the Bamboo and the Strip of Bamboo that we get will be Moved to Moving Equipment by Separating Between the Bamboo that Reused and Strips. The Strips can be used in Agriculture Later. From Testing this Project found that the Mechanical Systems can Produce Each Strip in 3 seconds Approximately and the thick Range that can be Sliced best is 0.3-0.7 Millimeters and Cleave the Bamboo 750 part / hourRajamangala University of Technology Phra Nakho