Discrete and continuous treatment of local buckling in stainless steel elements

Cross-section classification is an important concept in the design of metallic structures, as it addresses the susceptibility of a cross-section to local buckling and defines its appropriate design resistance. For structural stainless steel, test data on cross-section capacity have previously been relatively scarce. Existing design guidance has been developed based on the limited experimental results and conservative assumptions, generally leading to unduly strict slenderness limits. In recent years, available test data for stainless steel cross-sections have increased significantly, enabling these slenderness limits to be re-assessed. In this paper all available stainless steel test data have been collected and additional moment–rotation curves have been presented. The study covers both cold-formed and welded plated elements as well as CHS. Following analysis of the test results, new slenderness limits for all loading conditions have been proposed and statistically validated. In addition to re-assessment of the current slenderness limits, a new approach to the treatment of local buckling in structural elements–the Continuous Strength Method–has been outlined. The Continuous Strength Method (CSM) is based on a continuous relationship between cross-section slenderness and deformation capacity and is applied in conjunction with accurate material modelling. The method enables more rational and precise prediction of local buckling than can be achieved with the traditional cross-section classification approach, thus allowing better utilization of material and more economic design