This paper describes the design of a Digital Signal Processing (DSP) based JCU-STRAP (James Cook University Satellite Transmission Rain Attenuation Project) Ka band Satellite Beacon Receiver I Radiometer for measuring both the sky noise and the attenuation caused by rain and water vapour to satellite signals, at the same frequency and look angle. To obtain rain fade statistics, the received signal amplitude of a satellite beacon is record ed at an eight times per second rate. To maximise the dynamic range over which the receiver can stay locked onto the satellite beacon, a receiver with an ultra low phase noise and absence of spurious signals is required
This project consists of 2 parts, namely the hardware part and software part. For the hardware pa...
Satellite beacon is a signal which does not modulated and sent to ground in constant frequency with ...
Abstract- Quantitative analysis and prediction of radio signal attenuation is necessary in order to ...
This paper describes the design of a Digital Signal Processing (DSP) based JCU-STRAP (James Cook Un...
This paper describes the design of a Digital Signal Processing (DSP) based James Cook University – S...
This paper describes a Ka band Satellite Beacon Receiver 1 Radiometer for measuring both the sky noi...
This paper describes the design of a DSP based JCUSTRAP Ka band Satellite Beacon receiver/radiomete...
This paper describes the Digital Signal Processing (DSP) techniques required to ensure that a Ka ban...
ABSTRACT: This paper describes a Ka band satellite radar receiver system for measuring both the sky ...
This paper describes how DSP techniques can be used to improve the dynamic range of a satellite rece...
The demand for space services frequencies in the Asia region has increased rapidly and higher freque...
This paper presents the design and simulation of a typical Ka band satellite beacon receiver for pro...
This paper describes the design and development of a digital satellite beacon receiver for propagati...
The scope of the project is to study the Ku-‐band receiver system and the correlation between rainf...
Satellite tropospheric propagation studies strongly rely on beacon receiver measurements. We were in...
This project consists of 2 parts, namely the hardware part and software part. For the hardware pa...
Satellite beacon is a signal which does not modulated and sent to ground in constant frequency with ...
Abstract- Quantitative analysis and prediction of radio signal attenuation is necessary in order to ...
This paper describes the design of a Digital Signal Processing (DSP) based JCU-STRAP (James Cook Un...
This paper describes the design of a Digital Signal Processing (DSP) based James Cook University – S...
This paper describes a Ka band Satellite Beacon Receiver 1 Radiometer for measuring both the sky noi...
This paper describes the design of a DSP based JCUSTRAP Ka band Satellite Beacon receiver/radiomete...
This paper describes the Digital Signal Processing (DSP) techniques required to ensure that a Ka ban...
ABSTRACT: This paper describes a Ka band satellite radar receiver system for measuring both the sky ...
This paper describes how DSP techniques can be used to improve the dynamic range of a satellite rece...
The demand for space services frequencies in the Asia region has increased rapidly and higher freque...
This paper presents the design and simulation of a typical Ka band satellite beacon receiver for pro...
This paper describes the design and development of a digital satellite beacon receiver for propagati...
The scope of the project is to study the Ku-‐band receiver system and the correlation between rainf...
Satellite tropospheric propagation studies strongly rely on beacon receiver measurements. We were in...
This project consists of 2 parts, namely the hardware part and software part. For the hardware pa...
Satellite beacon is a signal which does not modulated and sent to ground in constant frequency with ...
Abstract- Quantitative analysis and prediction of radio signal attenuation is necessary in order to ...