Modellierung des Betriebsverhaltens katalytischer Rekombinatoren

Due to severe accidents in nuclear power plants, a significant amount of hydrogen can be produced. In pressurized water reactors, a possible and wide-spread measurement is the use of auto-catalytic recombiners. There are numerous numerical models describing the operational behaviour of recombiners for containment codes. The numerical model REKO-DIREKT was developed at the Forschungszentrum Juelich. This model describes the chemical reaction on the catalytic sheets by a physical model, as opposed to the usual codes based on empirical correlations. Additionally, there have been experimental studies concerning the catalytic recombination of hydrogen since the 1990s. The aim of this work is the further development of the program REKO-DIREKT to an independent recombiner model for severe accident and containment codes. Therefore, the catalyst model already existed has been submitted by a parameter optimization with an experimental database expanded during this work. In addition, a chimney model has been implemented which allows the calculation of the free convection flow through the recombiner housing due to the exothermal reaction. This model has been tested by experimental data gained by a recently built test facility. The complete recombiner model REKO-DIREKT has been validated by data from literature. Another aim of this work is the derivation of the reaction kinetics for recombiner designs regarding future reactor concepts. Therefore, experimental studies both on single catalytic coated meshes as well as on two meshes installed in a row have been performed in laboratory scale. By means of the measured data, a theoretical approach for the determination of the reaction rate has been derived