Add to ORKGThis research project focuses on the design, development and performance tests of a sedimentation trap model regarding to its usage in civil engineering construction site to remove or reduce the suspended solids (SS), especially for light soil particles such as silt and clay contained in the surface runoffs
An earlier version of a storm runoff simulator to test conservation buffers reproduced target hydrog...
Sedimentation devices have been widely implemented to remove suspended solids and attached pollutant...
Many of the problem pollutants are particulate-bound in storm water runoff. Test results indicated t...
This research project focuses on the design, development(fabrication)and performance ...
Erosion and sediment controls on construction sites minimize environmental impacts from sediment-lad...
This study examines the hydraulic characteristics of a horizontal flux sediment trap that can be us...
A literature survey had been conducted by the St. Anthony Falls Hydraulic Laboratory to assess vari...
Laboratory testing is the best method to determine the effectiveness of a manufactured stormwater se...
Cut-off slurries used in the construction of slurry trench and thin walls tend towards shifting of s...
The main objective of this study was to compare the total suspended solids (TSS) removal efficiency ...
Suspended sediment is the pollutant of primary concern to the urban rivers that results in adverse e...
This research effort focuses on improving sediment control practices used at highway construction pr...
This thesis investigates the hydraulic and runoff treatment capabilities of Underground Stormwater D...
Construction sites are one of the largest sources of sediment and contaminants. When rainfall occurs...
ABSTRACT: The filtration of suspensions containing clay and other particles in water is a common pro...
An earlier version of a storm runoff simulator to test conservation buffers reproduced target hydrog...
Sedimentation devices have been widely implemented to remove suspended solids and attached pollutant...
Many of the problem pollutants are particulate-bound in storm water runoff. Test results indicated t...
This research project focuses on the design, development(fabrication)and performance ...
Erosion and sediment controls on construction sites minimize environmental impacts from sediment-lad...
This study examines the hydraulic characteristics of a horizontal flux sediment trap that can be us...
A literature survey had been conducted by the St. Anthony Falls Hydraulic Laboratory to assess vari...
Laboratory testing is the best method to determine the effectiveness of a manufactured stormwater se...
Cut-off slurries used in the construction of slurry trench and thin walls tend towards shifting of s...
The main objective of this study was to compare the total suspended solids (TSS) removal efficiency ...
Suspended sediment is the pollutant of primary concern to the urban rivers that results in adverse e...
This research effort focuses on improving sediment control practices used at highway construction pr...
This thesis investigates the hydraulic and runoff treatment capabilities of Underground Stormwater D...
Construction sites are one of the largest sources of sediment and contaminants. When rainfall occurs...
ABSTRACT: The filtration of suspensions containing clay and other particles in water is a common pro...
An earlier version of a storm runoff simulator to test conservation buffers reproduced target hydrog...
Sedimentation devices have been widely implemented to remove suspended solids and attached pollutant...
Many of the problem pollutants are particulate-bound in storm water runoff. Test results indicated t...