Tribological characteristics of three PFPE\u27s (Fomblin Z, Demnum, and Krytox) were studied under high vacuum using a four-ball apparatus with 440C steel specimens. Fomblin Z and Demnum exhibited initial scuffing-like high friction whereas Krytox did not. Steady state friction with Fomblin Z was the lowest among the three oils. Frictional values for Demnum and Krytox were almost the same. The lowest wear rate in air was provided by Krytox regardless of load, and low wear rates in vacuum at high load were achieved with Krytox and Demnum. Results are explained by reactivity and pressure-viscosity characteristics of the oils
We present an overview of the recent activities performed by the European Space Tribology Laboratory...
We present the findings of the test program performed by The European Space Tribology Laboratory (ES...
A reciprocating tribometer and four-ball tribometer were used under controlled environmental conditi...
Tribological characteristics of three PFPE's (Fomblin Z, Demnum, and Krytox) were studied under high...
Tribological characteristics of three PFPEs (Fomblin Z, Demnum, and Krytox) were studied under high ...
This work presents the results of the X-Ray Photoelectron Spectroscopy (XPS) analysis of AISI 440C b...
The destruction rates of a perfluoropolyether (PFPE) lubricant, Krytox 143AC(TradeMark), subjected t...
science_and_mathematics_publications Part of the Chemical Engineering Commons, and the Chemistry Com...
The NASA Lewis Research Center has developed a new way to evaluate the liquid lubricants used in bal...
A tribometer for the evaluation of liquid lubricants in vacuum is described. This tribometer is esse...
The perfluoropolyether (PFPE) class of liquid lubricants has been used for space applications for ov...
Four different vacuum tribometers for the evaluation of liquid lubricants for space applications are...
The design and operation of a vacuum tribometer, based on the four-ball configuration, is described....
A ball bearing simulator operating under starved conditions was used to perform screening tests to e...
Spacecraft mechanism engineers are severely limited in their lubricant selection, primarily due to t...
We present an overview of the recent activities performed by the European Space Tribology Laboratory...
We present the findings of the test program performed by The European Space Tribology Laboratory (ES...
A reciprocating tribometer and four-ball tribometer were used under controlled environmental conditi...
Tribological characteristics of three PFPE's (Fomblin Z, Demnum, and Krytox) were studied under high...
Tribological characteristics of three PFPEs (Fomblin Z, Demnum, and Krytox) were studied under high ...
This work presents the results of the X-Ray Photoelectron Spectroscopy (XPS) analysis of AISI 440C b...
The destruction rates of a perfluoropolyether (PFPE) lubricant, Krytox 143AC(TradeMark), subjected t...
science_and_mathematics_publications Part of the Chemical Engineering Commons, and the Chemistry Com...
The NASA Lewis Research Center has developed a new way to evaluate the liquid lubricants used in bal...
A tribometer for the evaluation of liquid lubricants in vacuum is described. This tribometer is esse...
The perfluoropolyether (PFPE) class of liquid lubricants has been used for space applications for ov...
Four different vacuum tribometers for the evaluation of liquid lubricants for space applications are...
The design and operation of a vacuum tribometer, based on the four-ball configuration, is described....
A ball bearing simulator operating under starved conditions was used to perform screening tests to e...
Spacecraft mechanism engineers are severely limited in their lubricant selection, primarily due to t...
We present an overview of the recent activities performed by the European Space Tribology Laboratory...
We present the findings of the test program performed by The European Space Tribology Laboratory (ES...
A reciprocating tribometer and four-ball tribometer were used under controlled environmental conditi...