Experimental series were focused on catalytic hydrogenation of unsaturated components in pyrolysis gasoline: styrene, consecutive hydrogenation of dicyclopentadiene (DCPD) via dihydrodicyclopentadiene (DHDCPD) to tetrahydrodicyclopentadiene (THDCPD), indene, allylbenzene, 4-methylstyrene, 3-methylstyrene and 4-methylstyrene. Hydrogenation was investigated at temperature 30, 40 a 60°C and under hydrogen pressure 2 a 5 bar using Noblyst Degussa 1505 (0,1 hm. % Pd/ ? - Al2O3) catalyst
Liquid fuel production from low density polyethylene thermal decomposition using a Pyroprobe/GC/MS s...
Pyrolysis gasoline (PyGas) is a by-product of high temperature naphtha cracking during ethylene and ...
Fast pyrolysis oil can be upgraded by a catalytic hydrotreatment (250-400 degrees C, 100-200 bar) us...
Internal efficiency factors of palladium on alumina catalyst have been evaluated for hydrogenation o...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
AbstractPyrolysis oils derived from wood biomass attracted the attention of many researchers due to ...
The persistent growth in the global population has accounted for the continuous increase in the use ...
Typescript (photocopy).Pyrolysis exhibits promise as a process for the conversion of biomass residue...
Typescript (photocopy).Pyrolysis exhibits promise as a process for the conversion of biomass residue...
Abstract The high octane number of pyrolysis gasoline (PYGAS) explains its insertion in the gasoline...
Clean liquid fuel was produced from the catalytic hydrogenation of coal tar using two serial fixed b...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
Liquid fuel production from low density polyethylene thermal decomposition using a Pyroprobe/GC/MS s...
Liquid fuel production from low density polyethylene thermal decomposition using a Pyroprobe/GC/MS s...
Pyrolysis gasoline (PyGas) is a by-product of high temperature naphtha cracking during ethylene and ...
Fast pyrolysis oil can be upgraded by a catalytic hydrotreatment (250-400 degrees C, 100-200 bar) us...
Internal efficiency factors of palladium on alumina catalyst have been evaluated for hydrogenation o...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
AbstractPyrolysis oils derived from wood biomass attracted the attention of many researchers due to ...
The persistent growth in the global population has accounted for the continuous increase in the use ...
Typescript (photocopy).Pyrolysis exhibits promise as a process for the conversion of biomass residue...
Typescript (photocopy).Pyrolysis exhibits promise as a process for the conversion of biomass residue...
Abstract The high octane number of pyrolysis gasoline (PYGAS) explains its insertion in the gasoline...
Clean liquid fuel was produced from the catalytic hydrogenation of coal tar using two serial fixed b...
To optimize the chemical composition of catalysts for the selective hydrogenation of diene and vinyl...
Liquid fuel production from low density polyethylene thermal decomposition using a Pyroprobe/GC/MS s...
Liquid fuel production from low density polyethylene thermal decomposition using a Pyroprobe/GC/MS s...
Pyrolysis gasoline (PyGas) is a by-product of high temperature naphtha cracking during ethylene and ...
Fast pyrolysis oil can be upgraded by a catalytic hydrotreatment (250-400 degrees C, 100-200 bar) us...