Add to ORKGThe best scheme of chromatic dispersion compensation, input powers to standard and dispersion compensating fibre have been analysed numerical with the aim to find limits of NRZ data transmission over G.652 fibre. Theoretical results have partly been verified experimentally
10 Gbit/s transmission experiments on standard fibre (16 ps/km/nm) and with >100 km amplifier spacin...
Abstract: We report on 2×40 Gbit/s RZ-DQPSK transmission over a 263 km fiber link. Sufficient resili...
The optimum design for a 10Gb/s NRZ chirped fibre grating dispersion compensated system operating at...
A comparison of the NRZ- and RZ-transmission formats is investigated for 1.55µm 40Gbit/s dispersion ...
In this paper, dispersion compensating fibers are used to compensate for the positive dispersion acc...
In this paper, we investigate pre-, post- and symmetrical-dispersion compensation methods for 10 Gb/...
We compared numerically and experimentally the transmission behavior of return-to-zero (RZ) and nonr...
In the paper, the authors compare efficiency of two physical dispersion compensation methods for sin...
The optimum design for a 10Gb/s NRZ chirped fibre grating dispersion compensated system operating at...
10 Gb/s transmission experiments in a recirculating loop with standard single-mode and dispersion co...
Nonreturn-to-zero (NRZ)- and return-to-zero (RZ)-transmission formats are investigated for 1.55µm 40...
With the recent data rate increase it is very challenging to build a fibre optic network that would ...
Transmission of 10Gbit/s per channel WDM over standard fibre using dispersion compensating fibre gra...
Dispersion is the most important factor which determines the data rate and the maximum repeater dist...
[[abstract]]The major purpose of this thesis is to improve the efficiency of fiber transmission usin...
10 Gbit/s transmission experiments on standard fibre (16 ps/km/nm) and with >100 km amplifier spacin...
Abstract: We report on 2×40 Gbit/s RZ-DQPSK transmission over a 263 km fiber link. Sufficient resili...
The optimum design for a 10Gb/s NRZ chirped fibre grating dispersion compensated system operating at...
A comparison of the NRZ- and RZ-transmission formats is investigated for 1.55µm 40Gbit/s dispersion ...
In this paper, dispersion compensating fibers are used to compensate for the positive dispersion acc...
In this paper, we investigate pre-, post- and symmetrical-dispersion compensation methods for 10 Gb/...
We compared numerically and experimentally the transmission behavior of return-to-zero (RZ) and nonr...
In the paper, the authors compare efficiency of two physical dispersion compensation methods for sin...
The optimum design for a 10Gb/s NRZ chirped fibre grating dispersion compensated system operating at...
10 Gb/s transmission experiments in a recirculating loop with standard single-mode and dispersion co...
Nonreturn-to-zero (NRZ)- and return-to-zero (RZ)-transmission formats are investigated for 1.55µm 40...
With the recent data rate increase it is very challenging to build a fibre optic network that would ...
Transmission of 10Gbit/s per channel WDM over standard fibre using dispersion compensating fibre gra...
Dispersion is the most important factor which determines the data rate and the maximum repeater dist...
[[abstract]]The major purpose of this thesis is to improve the efficiency of fiber transmission usin...
10 Gbit/s transmission experiments on standard fibre (16 ps/km/nm) and with >100 km amplifier spacin...
Abstract: We report on 2×40 Gbit/s RZ-DQPSK transmission over a 263 km fiber link. Sufficient resili...
The optimum design for a 10Gb/s NRZ chirped fibre grating dispersion compensated system operating at...