The effect of minor transition metals and rare earths on glass-forming ability, thermal stability and crystallization of [(Fe0.6Co0.4)0.75Si0.05B0.20]96-xNb4Mx alloys was investigated. The thermodynamic parameters traditionally used to predict the glass-forming ability have been calculated from calorimetric data and tested against mold casting. Only the addition of Zr and Mo allowed to cast 2 mm diameter rods, which does not correlate with predicted results. The microstructural evolution of the different alloys along the crystallization process has been studied by means of transmission Mössbauer spectroscopy showing for all studied compositions (FeCo)23B6 as primary phase that remains stable in the fully crystallized samples. Moreover, the ...
The paper presents the structural analysis of Fe62xCoxNb8B30 metallic glasses (x = 0; 20) in as-cast...
The present work reports investigation on the Glass Forming Ability (GFA) of Zr-based Bulk Metallic ...
Fully amorphous rods with diameters up to 2 mm diameter were obtained upon 0.5 at.% Cu addition to t...
The effect of minor transition metals and rare earths on glass-forming ability, thermal stability an...
Understanding the crystallization of metallic glasses is fundamental in the design of new alloys wit...
Understanding the crystallization of metallic glasses is fundamental in the design of new alloys wit...
The devitrification of the Fe65Nb10B25 and Fe70Nb10B20 metallic glasses produced by melt spinning ha...
Fe64B24Y4Nb6 metallic glass ribbon and its bulk counterpart were characterized by conventional and h...
International audienceRecently, (Fe-Co)-B-Si-Nb bulk metallic glasses (BMGs) were produced. Such BMG...
Starting from the Fe52Co23Nb4Si5B16 alloy having good soft magnetic properties and tendency to amorp...
The effect of varying thickness on structure and thermal properties is investigated in Fe-B-Nb and F...
The ferromagnetic Fe-based amorphous alloys were studied due to properties for soft magnetic applica...
A new Fe-based bulk metallic glass with superior glass-forming ability (GFA), Fe46Cr15Mo14C15B6Nb4, ...
AbstractFully amorphous rods with diameters up to 2mm diameter were obtained upon 0.5at.% Cu additio...
Alloying elements play an important role in adjusting the magnetic and thermal properties of Fe-base...
The paper presents the structural analysis of Fe62xCoxNb8B30 metallic glasses (x = 0; 20) in as-cast...
The present work reports investigation on the Glass Forming Ability (GFA) of Zr-based Bulk Metallic ...
Fully amorphous rods with diameters up to 2 mm diameter were obtained upon 0.5 at.% Cu addition to t...
The effect of minor transition metals and rare earths on glass-forming ability, thermal stability an...
Understanding the crystallization of metallic glasses is fundamental in the design of new alloys wit...
Understanding the crystallization of metallic glasses is fundamental in the design of new alloys wit...
The devitrification of the Fe65Nb10B25 and Fe70Nb10B20 metallic glasses produced by melt spinning ha...
Fe64B24Y4Nb6 metallic glass ribbon and its bulk counterpart were characterized by conventional and h...
International audienceRecently, (Fe-Co)-B-Si-Nb bulk metallic glasses (BMGs) were produced. Such BMG...
Starting from the Fe52Co23Nb4Si5B16 alloy having good soft magnetic properties and tendency to amorp...
The effect of varying thickness on structure and thermal properties is investigated in Fe-B-Nb and F...
The ferromagnetic Fe-based amorphous alloys were studied due to properties for soft magnetic applica...
A new Fe-based bulk metallic glass with superior glass-forming ability (GFA), Fe46Cr15Mo14C15B6Nb4, ...
AbstractFully amorphous rods with diameters up to 2mm diameter were obtained upon 0.5at.% Cu additio...
Alloying elements play an important role in adjusting the magnetic and thermal properties of Fe-base...
The paper presents the structural analysis of Fe62xCoxNb8B30 metallic glasses (x = 0; 20) in as-cast...
The present work reports investigation on the Glass Forming Ability (GFA) of Zr-based Bulk Metallic ...
Fully amorphous rods with diameters up to 2 mm diameter were obtained upon 0.5 at.% Cu addition to t...