Bright green electroluminescence with luminance up to 2800 cd/m² is reported from indium-tin-oxide/SiO2:Tb/Si metal-oxide-semiconductor devices. The SiO2:Tb3+ gate oxide was prepared by thermal oxidation followed by Tb+ implantation. Electroluminescence and photoluminescence properties were studied with variations of the Tb3+ ion concentration and the annealing temperature. The optimized device shows a high external quantum efficiency of 16% and a luminous efficiency of 2.1 lm/W. The excitation processes of the strong green electroluminescence are attributed to the impact excitation of the Tb3+ luminescent centers by hot electrons and the subsequent crossrelaxation from 5D3 to 5D4 energy levels. Light-emitting devices with micrometer size ...
In this study, a terbium complex, Tb(acac)(3)bath (acac: acetylacetone, bath: 4,7-diphenyl-1,10-phen...
Electroluminescent devices were fabricated in SiO_2 films containing Ge nanocrystals formed by ion i...
In this work, the role of the nitrogen content, the annealing temperature, and the sample morphology...
High optical power density of 0.5 mW/cm2, external quantum efficiency of 0.1%, and population invers...
Strong ultraviolet electroluminescence with an external quantum efficiency above 1% is observed from...
In this work, the fabrication and the structural, optical and electrical properties of Al-Tb/SiO2 na...
Thermal quenching and thermal dependences of the electrical quenching of electroluminescence in meta...
Efficient infra-red and visible electroluminescence (EL) has been obtained from implanted rare earth...
In this work, the fabrication and the structural, optical and electrical properties of Al-Tb/SiO2 na...
We describe efficient electroluminescence from a terbium complex, tris-(1-phenyl-3-methyl-4-isobutyr...
Recent progress on electrically driven silicon based light emitters is reviewed, with emphasis on ou...
The suitability of rare earth doped metal-oxide-semiconductor structures for optoelectronic applicat...
Mechanisms of light emission in Tb doped Si rich SiOx matrix prepared by magnetron sputtering are st...
The potential for application of silicon nitride-based light sources to general lighting is reported...
The effect of adding terbium to indium tin oxide ITO thin films on the electrical, optical and li...
In this study, a terbium complex, Tb(acac)(3)bath (acac: acetylacetone, bath: 4,7-diphenyl-1,10-phen...
Electroluminescent devices were fabricated in SiO_2 films containing Ge nanocrystals formed by ion i...
In this work, the role of the nitrogen content, the annealing temperature, and the sample morphology...
High optical power density of 0.5 mW/cm2, external quantum efficiency of 0.1%, and population invers...
Strong ultraviolet electroluminescence with an external quantum efficiency above 1% is observed from...
In this work, the fabrication and the structural, optical and electrical properties of Al-Tb/SiO2 na...
Thermal quenching and thermal dependences of the electrical quenching of electroluminescence in meta...
Efficient infra-red and visible electroluminescence (EL) has been obtained from implanted rare earth...
In this work, the fabrication and the structural, optical and electrical properties of Al-Tb/SiO2 na...
We describe efficient electroluminescence from a terbium complex, tris-(1-phenyl-3-methyl-4-isobutyr...
Recent progress on electrically driven silicon based light emitters is reviewed, with emphasis on ou...
The suitability of rare earth doped metal-oxide-semiconductor structures for optoelectronic applicat...
Mechanisms of light emission in Tb doped Si rich SiOx matrix prepared by magnetron sputtering are st...
The potential for application of silicon nitride-based light sources to general lighting is reported...
The effect of adding terbium to indium tin oxide ITO thin films on the electrical, optical and li...
In this study, a terbium complex, Tb(acac)(3)bath (acac: acetylacetone, bath: 4,7-diphenyl-1,10-phen...
Electroluminescent devices were fabricated in SiO_2 films containing Ge nanocrystals formed by ion i...
In this work, the role of the nitrogen content, the annealing temperature, and the sample morphology...