It is known that polystyrene must be chemically modified to make its surface enable to covalent cross-linking with protein. The aim of this study was to develop UV/Ozone treatment system and investigate the effects of treatment system on surface of polystyrene beads. The surface of polystyrene beads with an average size of 150μm was modified by UV/ozone treatment with or without distilled water at the same treatment time, ozone flow-rate and UV intensity. The treated beads were analyzed by ATR-FTIR to determine the introduction of carbonyl (-C=O) and carboxylic (COOH) onto the polystyrene surface. Sample characterization was also carried out by SEM, EDX and hydrophilicity test. The results show that there was an increased in hydrophilicity ...
Vacuum-ultraviolet (VUV) irradiation (kexc: 172 ± 12 nm) of polystyrene films in the presence of oxy...
Polystyrene (PS) has a wide range of technological applications due to the excellent bulk properties...
Two styrene–bTwo styrene–butadiene–styrene block rubbers, one with 10wt% calcium carbonate filler (S...
It is known that polystyrene must be chemically modified to make its surface enable to covalent cros...
It is known that polystyrene must be chemically modified to make its surface amenable to covalent cr...
Polystyrene failed to provide any reactive functionality of surface hydrophilicity that is capable o...
This study investigated the effects of oxidation of polystyrene (PS) microspheres by three different...
The impact of UV/ozone treatment on the wettability and adhesion of ethylene propylene diene methyle...
Surface interactions and reactivity are of critical importance in current biomedical technologies, f...
Oxidation is a common physical treatment used to render the surface of polystyrene suitable for cel...
Oxidation is a common physical treatment used to render the surface of polystyrene suitable for cel...
ABSTRACT: Dry oxidizing methods have been widely used to modify surface prop-erties of polymer and c...
Polymers have ideal bulk properties for many applications. However, adhesion to many polymers is poo...
[[abstract]]This paper introduces electrokinetic separation inside fully cross-linked epoxy-based po...
Polyester fibers (PES) are the most consumed textile fibers due to their low water absorption; non-i...
Vacuum-ultraviolet (VUV) irradiation (kexc: 172 ± 12 nm) of polystyrene films in the presence of oxy...
Polystyrene (PS) has a wide range of technological applications due to the excellent bulk properties...
Two styrene–bTwo styrene–butadiene–styrene block rubbers, one with 10wt% calcium carbonate filler (S...
It is known that polystyrene must be chemically modified to make its surface enable to covalent cros...
It is known that polystyrene must be chemically modified to make its surface amenable to covalent cr...
Polystyrene failed to provide any reactive functionality of surface hydrophilicity that is capable o...
This study investigated the effects of oxidation of polystyrene (PS) microspheres by three different...
The impact of UV/ozone treatment on the wettability and adhesion of ethylene propylene diene methyle...
Surface interactions and reactivity are of critical importance in current biomedical technologies, f...
Oxidation is a common physical treatment used to render the surface of polystyrene suitable for cel...
Oxidation is a common physical treatment used to render the surface of polystyrene suitable for cel...
ABSTRACT: Dry oxidizing methods have been widely used to modify surface prop-erties of polymer and c...
Polymers have ideal bulk properties for many applications. However, adhesion to many polymers is poo...
[[abstract]]This paper introduces electrokinetic separation inside fully cross-linked epoxy-based po...
Polyester fibers (PES) are the most consumed textile fibers due to their low water absorption; non-i...
Vacuum-ultraviolet (VUV) irradiation (kexc: 172 ± 12 nm) of polystyrene films in the presence of oxy...
Polystyrene (PS) has a wide range of technological applications due to the excellent bulk properties...
Two styrene–bTwo styrene–butadiene–styrene block rubbers, one with 10wt% calcium carbonate filler (S...
Add to ORKG