Effects of frictional forces acting on sidewalls of box culverts

The effects of frictional forces acting on the sidewalls of buried box culverts are presented as determined with finite element method (FEM) and detailed soil modelling. The possibility of reducing earth pressure on deeply buried concrete box culverts by the imperfect trench installation (ITI) method has been contemplated during the last several decades. There have been limited research results published primarily regarding the qualitative aspect of load reduction in ITIs. It was found during the course of this study that significant frictional forces develop along the sidewalls of box culverts and adjacent sidefills in ITIs. Current American Association of State Highway and Transportation Officials provisions do not consider these frictional forces, but they cannot be neglected in ITIs, as their effect is dominant. An optimum geometry for the soft zone in ITIs is presented to maximize earth load reductions. The soil–structure interaction at the box culvert–soil interface was found to have a significant effect on total earth pressure acting on the bottom slab. Predictor equations for earth load reduction rates were formulated for ITIs incorporating the optimum soft zone geometry based on the FEM.The a uthors gratefully acknowledge the financial support of Alabama Department of Transportation Project Number 930-592, in developing the work presented here.OAIID:RECH_ACHV_DSTSH_NO:T200700096RECH_ACHV_FG:RR00200001ADJUST_YN:EMP_ID:A080442CITE_RATE:.706DEPT_NM:조경·지역시스템공학부SCOPUS_YN:YCONFIRM: