The Effect of Polymer Concentration on Flux Stability of Polysulfone Membrane

362-368The influence of various polymer concentrations on flux stability of polysulfone membranes was investigated. The polysulfone membrane was prepared by blending polysulfone in DMAc with 25%wt concentration of PEG400 and 4% wt concentration of acetone. It was found that the pure water flux was sharply decreased from 1230 to7 Lm-2h-1, when the polysulfone concentration was increased from 14% to 24%wt. Furthermore, the increase of polysulfone concentration also affects the fouling behavior of the membranes, in which almost of 90% of FRR was achieved by the addition of 18 %wt of polysulfone concentration. It was suggested that fouling formed on the membrane surface was dominated by reversible fouling, thus it could be easily cleaned by flushing method. In addition, the applied transmembrane pressure (TMP) also plays an important role in fouling behavior of polysulfone membrane. It was observed that irreversible fouling of organic matter was deteriorated by the increase of TMP, which contributed to the reduction of water flux. More stable membrane flux performance was achieved although it was operated at high TMP, when 20% wt concentration of polysulfone was added into membrane solution