Add to ORKG388-392A geometric model has been presented to predict the strength and stretch behavior of woven tape fabrics that are usually utilized in geotextile appl ications. Model input parameters include fabric geometric parameters, tape bending effect, consolidations, and tensile properties. It is possible to predict the strength of the commercial geotextile fabric within 10% of the experimentally determined values in most of the cases. Some discrepancies have been noted that are probably due to the high variation in tape tensile properties and estimation in the angle θ1
A theoretical approach for predicting the tensile behavior of needle punched-heat set heavy geotexti...
In this study, polypropylene and polyester woven geotextiles having 5, 8, and 12 ton/m design streng...
The use of non-woven geotextiles has been increasing exponentially since the 1970s. Due to the lack ...
Copyright © 11th Inter. Conf. on Geos. 2018, ICG 2018. All rights reserved.Geotextiles, which are th...
Purpose - The purpose of this paper is to propose a theoretical model to predict the mechanical beha...
The paper reports the results of the analysis of mechanical properties of nonwoven geotextile materi...
ABSTRACT: Needlepunched nonwoven geotextiles are widely used for various civil engineering applicati...
In order to provide more efficient production and use of geotextile materials, their structural and...
Heat-bonded nonwoven geotextiles (HBNGs) made from synthetic fibers are widely used in engineering p...
Textiles exhibit nonlinear behavior when exposed to mechan-ical loading. Namely in tension, in the b...
The National Textile Center has initiated an extensive study at the Auburn University from Spring 19...
The present study reports the mechanical behaviour of needle-punched nonwoven fabrics developed for...
International audienceThe weavability limit and tightness for 2D and 3D woven fabrics is an importan...
ABSTRACT: Measurement of the tensile properties of high strength woven and knit fabrics, including g...
AbstractThis paper predict mechanical behaviour of complicated woven 2x2 twill fabric textile compos...
A theoretical approach for predicting the tensile behavior of needle punched-heat set heavy geotexti...
In this study, polypropylene and polyester woven geotextiles having 5, 8, and 12 ton/m design streng...
The use of non-woven geotextiles has been increasing exponentially since the 1970s. Due to the lack ...
Copyright © 11th Inter. Conf. on Geos. 2018, ICG 2018. All rights reserved.Geotextiles, which are th...
Purpose - The purpose of this paper is to propose a theoretical model to predict the mechanical beha...
The paper reports the results of the analysis of mechanical properties of nonwoven geotextile materi...
ABSTRACT: Needlepunched nonwoven geotextiles are widely used for various civil engineering applicati...
In order to provide more efficient production and use of geotextile materials, their structural and...
Heat-bonded nonwoven geotextiles (HBNGs) made from synthetic fibers are widely used in engineering p...
Textiles exhibit nonlinear behavior when exposed to mechan-ical loading. Namely in tension, in the b...
The National Textile Center has initiated an extensive study at the Auburn University from Spring 19...
The present study reports the mechanical behaviour of needle-punched nonwoven fabrics developed for...
International audienceThe weavability limit and tightness for 2D and 3D woven fabrics is an importan...
ABSTRACT: Measurement of the tensile properties of high strength woven and knit fabrics, including g...
AbstractThis paper predict mechanical behaviour of complicated woven 2x2 twill fabric textile compos...
A theoretical approach for predicting the tensile behavior of needle punched-heat set heavy geotexti...
In this study, polypropylene and polyester woven geotextiles having 5, 8, and 12 ton/m design streng...
The use of non-woven geotextiles has been increasing exponentially since the 1970s. Due to the lack ...