Interfacial studies of polyamide 6 composites filled with oxidation carbon fiber

319-325In this work, ozone modification method and air-oxidation are used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers are characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites are investigated by means of the single fiber pull-out tests. As a result, it is found that IFSS values of the composites with ozone treated carbon fiber are increased by 60% compared to that without treatment. XPS results show that ozone treatment increases the amount of carboxyl groups on carbon fiber surface, thus the interfacial adhesion between carbon fiber and PA6 matrix is effectively promoted. The effect of surface treatment of carbon fibers on the tribological properties of CF/PA6 composites is investigated. Experimental results reveal that surface treatment can effectively improve the interfacial adhesion between carbon fiber and PA6 matrix. Thus, the wear resistance is significantly improved