In the present work Zn-ZrO2 nanocomposite coatings (ZrO2 0.2-2.5 wt%) on mild steel substrate have been produced by electrodeposition technique with high current efficiency. Electrodepositions were performed at 35°C by using a chloride bath containing gelatine and yttria-stabilized zirconia nanoparticles (<100 nm); the tests were carried out under galvanostatic control with pulsed direct current, using a cathodic square wave (pulse frequency 1 Hz, duty cycle 50%). The coatings were characterized by means of X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and Vickers microhardness measurement. Corrosion potential and polarization resistance measurements were performed in 3.5 % NaCl solution. The co...
Zn alloy and composite coatings are widely used in buildings and structures, automobile and fastener...
Corrosion resistance of Zn-Ni-Al2O3 nanocomposite coatings was studied. Zn-Ni alloy was electrodepos...
Ni-P\nano-ZrO2 composite coatings were obtained on the AISI 304 steel substrate by the electroless m...
In the present work Zn-ZrO2 nanocomposite coatings (ZrO2 0.2-2.5 wt%) on mild steel substrate have b...
Corrosion resistance of Zn-Ni-ZrO2 nanocomposite coatings was studied. Zn-Ni alloy was electrodeposi...
Electrodeposition is a widely used method to protect metallic materials from corrosion. Electrodepos...
Pulse electrodeposition is a technique of particular interest, which offers promising advantages suc...
Electrodeposition is a widely used method to protect metallic materials from corrosion. Electrodepos...
The Zn-CeO 2 composite coatings through electrodeposition technique were successfully fabricated on ...
The Ni-Mo-ZrO2 composite coatings produced by electrodeposition from citrate electrolyte which conta...
Zn-Ni-ZrO2, Zn-Ni-Al2O3 and Zn-Ni-SiC nanocomposite coatings were obtained on mild steel substrate b...
Zn-SiC composite coatings were obtained on mild steel substrate by electrodeposition technique with ...
Cu-ZrO2 nanocomposite coatings prepared by electrodeposition method. In bath solution containin...
A nano-ZrO2 modified coating system was prepared by incorporation of nano-ZrO2 concentrates into phe...
cited By 0International audiencePure Zn-Ni and Zn–Ni–ceria (CeO2) nanocomposite coatings were deposi...
Zn alloy and composite coatings are widely used in buildings and structures, automobile and fastener...
Corrosion resistance of Zn-Ni-Al2O3 nanocomposite coatings was studied. Zn-Ni alloy was electrodepos...
Ni-P\nano-ZrO2 composite coatings were obtained on the AISI 304 steel substrate by the electroless m...
In the present work Zn-ZrO2 nanocomposite coatings (ZrO2 0.2-2.5 wt%) on mild steel substrate have b...
Corrosion resistance of Zn-Ni-ZrO2 nanocomposite coatings was studied. Zn-Ni alloy was electrodeposi...
Electrodeposition is a widely used method to protect metallic materials from corrosion. Electrodepos...
Pulse electrodeposition is a technique of particular interest, which offers promising advantages suc...
Electrodeposition is a widely used method to protect metallic materials from corrosion. Electrodepos...
The Zn-CeO 2 composite coatings through electrodeposition technique were successfully fabricated on ...
The Ni-Mo-ZrO2 composite coatings produced by electrodeposition from citrate electrolyte which conta...
Zn-Ni-ZrO2, Zn-Ni-Al2O3 and Zn-Ni-SiC nanocomposite coatings were obtained on mild steel substrate b...
Zn-SiC composite coatings were obtained on mild steel substrate by electrodeposition technique with ...
Cu-ZrO2 nanocomposite coatings prepared by electrodeposition method. In bath solution containin...
A nano-ZrO2 modified coating system was prepared by incorporation of nano-ZrO2 concentrates into phe...
cited By 0International audiencePure Zn-Ni and Zn–Ni–ceria (CeO2) nanocomposite coatings were deposi...
Zn alloy and composite coatings are widely used in buildings and structures, automobile and fastener...
Corrosion resistance of Zn-Ni-Al2O3 nanocomposite coatings was studied. Zn-Ni alloy was electrodepos...
Ni-P\nano-ZrO2 composite coatings were obtained on the AISI 304 steel substrate by the electroless m...