Add to ORKGTwo types of rapidly solidified filler alloys of nominal composition Cu-40Mn-10Ni (C50) and Ni-7Cr-3 center dot 2B-4 center dot 5Si-3Fe (N82)were used for stainless steel (SS404) brazing joints. The C50 foil is crystalline in nature, whereas N82 foil shows amorphous structure. The SS304/C50/SS304 joint shows solid solution phases at interfacial area, with maximum bond strength of 500 MPa, which qualifies to 80% of base metal strength. Conversely, the SS304/N82/SS304 joint develops brittle CrxBy inter-metallic phases, which lowers bond strength to 330 Mpa
In the present study, vacuum brazing was applied to join Ti-6Al-4V and stainless steel using AgCuZn ...
1Cr12Mo martensitic stainless steel is widely used for intermediate and low-pressure steam turbine b...
A rapidly solidified (RS) low-sliver brazing alloy with 50% saving in silver has been developed as a...
The joining behaviour between stainless steel and copper has an importance in scientific and enginee...
The filler alloy of nominal composition Cu–40Mn–10Ni (all in wt%) was prepared in the form of ribbon...
In this study, an amorphous Ni-13.4Cr-11.6P (mass%) alloy coating with a thickness of 30 μm was depo...
The problem of stainless steel brazing is still the focus of scientific research. In this work, the ...
The research involved vacuum tests of brazing properties of silver filler metals, containing tin as ...
The microstructure and properties of a Cu/304 stainless steel dissimilar metal joint brazed with a l...
The joining behavior of 304SS and Cu joint is important for the component materials of the first wal...
Joining behaviors of SS321 stainless steel and 9Cr-1Mo steel have been investigated by a rapidly so...
A Ni-P plated layer of 20 μm thickness containing 11 wt.% P was formed on the surface of a stainl...
In this study, an amorphous Ni-13.4Cr-11.6P (mass%) alloy coating with a thickness of 30 mu m was de...
Diffusion brazing is employed to join stainless steel 304 using pure copper foil interlayer. The bon...
The brazing of Mo-Cu composite and 304 stainless steel was carried out in vacuum with Ni-Cr-P filler...
In the present study, vacuum brazing was applied to join Ti-6Al-4V and stainless steel using AgCuZn ...
1Cr12Mo martensitic stainless steel is widely used for intermediate and low-pressure steam turbine b...
A rapidly solidified (RS) low-sliver brazing alloy with 50% saving in silver has been developed as a...
The joining behaviour between stainless steel and copper has an importance in scientific and enginee...
The filler alloy of nominal composition Cu–40Mn–10Ni (all in wt%) was prepared in the form of ribbon...
In this study, an amorphous Ni-13.4Cr-11.6P (mass%) alloy coating with a thickness of 30 μm was depo...
The problem of stainless steel brazing is still the focus of scientific research. In this work, the ...
The research involved vacuum tests of brazing properties of silver filler metals, containing tin as ...
The microstructure and properties of a Cu/304 stainless steel dissimilar metal joint brazed with a l...
The joining behavior of 304SS and Cu joint is important for the component materials of the first wal...
Joining behaviors of SS321 stainless steel and 9Cr-1Mo steel have been investigated by a rapidly so...
A Ni-P plated layer of 20 μm thickness containing 11 wt.% P was formed on the surface of a stainl...
In this study, an amorphous Ni-13.4Cr-11.6P (mass%) alloy coating with a thickness of 30 mu m was de...
Diffusion brazing is employed to join stainless steel 304 using pure copper foil interlayer. The bon...
The brazing of Mo-Cu composite and 304 stainless steel was carried out in vacuum with Ni-Cr-P filler...
In the present study, vacuum brazing was applied to join Ti-6Al-4V and stainless steel using AgCuZn ...
1Cr12Mo martensitic stainless steel is widely used for intermediate and low-pressure steam turbine b...
A rapidly solidified (RS) low-sliver brazing alloy with 50% saving in silver has been developed as a...