The present paper reports the formation of novel morphologies of intermetallic compounds during the solidification of different Al-Fe-V-Si alloys using cooling rates ranging from I to 20 K s(-1). The influence of cooling rate, composition of the alloy and the addition of Mg and Ni-20%Mg alloy on the morphology of the intermetallic phases, particularly that of Al13Fe4 phase, is reported. Al13Fe4 forms with a ten-armed star shaped morphology with small amount of Si (<1 wt.%) at a cooling rate of approximate to14 K s(-1). A lower cooling rate and higher Si content result in degeneration of the ten-armed stars into other morphologies. The higher the Si content, the higher the cooling rate required to form the ten-armed star-shaped Al13Fe4 phase...
The influence of cooling rate on the chemical composition and morphological structure of Fe-rich int...
© The Author(s) 2018. Iron (Fe) is the most common and the most detrimental impurity element in Al a...
Secondary Al–Si alloys Al7.1Si(1.5-xMn)Fe(xMn)Mn with xMn = 0, 0.3, 0.375, 0.6, 0.75 at.% have been ...
The present paper reports the formation of novel morphologies of intermetallic compounds during the ...
The present paper reports the formation of novel morphologies of intermetallic compounds during the ...
Recently, AI-Fe-V-Si alloys have received more attention owing to their high temperature stability a...
In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are ...
The influence of cooling rate during solidification on the three dimensional (3D) morphology of iron...
The crystallization behaviour of iron intermetallics during solidification and the dissolution behav...
The formation of iron-bearing intermetallics in the 413 type of aluminum alloys was investigated com...
Aluminium based alloys with suitable alloying additions are being considered for high temperature ap...
The cooling rate is one of the main tools available to the process engineer by means of which it is ...
The present study of rapidly solidified melt-spun Al80Fe14Si6Al80V14Si6, and Al80Fe10V4Si6 alloys by...
Technical Al-Si alloys always contain sufficient amounts of Fe and Mn, especially alloys made from s...
The present study of rapidly solidified melt-spun Al80Fe14Si6 Al80V14Si6, and Al80Fe10V4Si6 alloys b...
The influence of cooling rate on the chemical composition and morphological structure of Fe-rich int...
© The Author(s) 2018. Iron (Fe) is the most common and the most detrimental impurity element in Al a...
Secondary Al–Si alloys Al7.1Si(1.5-xMn)Fe(xMn)Mn with xMn = 0, 0.3, 0.375, 0.6, 0.75 at.% have been ...
The present paper reports the formation of novel morphologies of intermetallic compounds during the ...
The present paper reports the formation of novel morphologies of intermetallic compounds during the ...
Recently, AI-Fe-V-Si alloys have received more attention owing to their high temperature stability a...
In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are ...
The influence of cooling rate during solidification on the three dimensional (3D) morphology of iron...
The crystallization behaviour of iron intermetallics during solidification and the dissolution behav...
The formation of iron-bearing intermetallics in the 413 type of aluminum alloys was investigated com...
Aluminium based alloys with suitable alloying additions are being considered for high temperature ap...
The cooling rate is one of the main tools available to the process engineer by means of which it is ...
The present study of rapidly solidified melt-spun Al80Fe14Si6Al80V14Si6, and Al80Fe10V4Si6 alloys by...
Technical Al-Si alloys always contain sufficient amounts of Fe and Mn, especially alloys made from s...
The present study of rapidly solidified melt-spun Al80Fe14Si6 Al80V14Si6, and Al80Fe10V4Si6 alloys b...
The influence of cooling rate on the chemical composition and morphological structure of Fe-rich int...
© The Author(s) 2018. Iron (Fe) is the most common and the most detrimental impurity element in Al a...
Secondary Al–Si alloys Al7.1Si(1.5-xMn)Fe(xMn)Mn with xMn = 0, 0.3, 0.375, 0.6, 0.75 at.% have been ...