With rapid industrialisation, the amount of e-wastes is in-creasing enormously in the world. In order to conserve res-ources and reduce environmental pollution, attempts are be-ing made to recover the valuables from such wastes. The present paper reports the studies carried out for separat-ion of metals viz.copper,cadmium,zinc and nickel expected from leaching of e-wastes. Initially, studies have been made to establish the condition required for cadmium extra-ction. The solvent,DEHPA was found suitable for extraction of cadmium and complete extraction can be achieved at pH 4.5 , O/A in 2 minutes from the sulfate solution . The studies carried out with model mixed solution containing copper, cadmium, zinc and nickel showed th...
An initial test work was carried out to demonstrate that solution produced by autoclave acid leachin...
Electronic waste (E-waste) is the term used to describe old, end-of-life or discarded applications. ...
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University Lo...
Cadmium has wide application in the manufacturing of alloys, batteries, pigments and metal plating. ...
Discarded computers, mobiles and other consumer electronics (e-waste) are the fastest growing portio...
The cementation cake (CINKUR Co., Turkiye) was leached with hydrochloric acid. The extraction and co...
Abstract Global generation of waste electrical and electronic equipment (WEEE) is increasing quickly...
Present work is a part of a process which consists of pre-treatment, leaching and solvent extraction...
Recovery of valuable metals such as copper, nickel and zinc from synthetic sulfate solutions using L...
In present study, selective extraction of cadmium from acidic leach solutions, containing various he...
Present work is a part of a process which consists of pre-treatment, leaching and solvent extrac...
In this study, a hydrometallurgical treatment involving the solvent extraction and recovery of some ...
Solvent extraction was used to recover nickel and zinc from synthetic acidic solution. Many leaching...
The simultaneous effect of different factors such as pH, carrier concentrations, organic phase modif...
The extraction of metals from waste printed circuit boards (WPCBs) with ionic liquids (ILs), Deep Eu...
An initial test work was carried out to demonstrate that solution produced by autoclave acid leachin...
Electronic waste (E-waste) is the term used to describe old, end-of-life or discarded applications. ...
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University Lo...
Cadmium has wide application in the manufacturing of alloys, batteries, pigments and metal plating. ...
Discarded computers, mobiles and other consumer electronics (e-waste) are the fastest growing portio...
The cementation cake (CINKUR Co., Turkiye) was leached with hydrochloric acid. The extraction and co...
Abstract Global generation of waste electrical and electronic equipment (WEEE) is increasing quickly...
Present work is a part of a process which consists of pre-treatment, leaching and solvent extraction...
Recovery of valuable metals such as copper, nickel and zinc from synthetic sulfate solutions using L...
In present study, selective extraction of cadmium from acidic leach solutions, containing various he...
Present work is a part of a process which consists of pre-treatment, leaching and solvent extrac...
In this study, a hydrometallurgical treatment involving the solvent extraction and recovery of some ...
Solvent extraction was used to recover nickel and zinc from synthetic acidic solution. Many leaching...
The simultaneous effect of different factors such as pH, carrier concentrations, organic phase modif...
The extraction of metals from waste printed circuit boards (WPCBs) with ionic liquids (ILs), Deep Eu...
An initial test work was carried out to demonstrate that solution produced by autoclave acid leachin...
Electronic waste (E-waste) is the term used to describe old, end-of-life or discarded applications. ...
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University Lo...