Add to ORKGThe use of different fluxes for the removal of undesirable impurities from various non-ferrous metals and alloys has been stated. Oxidizing conditions for the removal of hydrogen and deoxidation of some alloys by phosphorus, copper, magnesium mag nesium-boron, etc., have been described.The fluxes for elimination of lead oxide and the effect of nickel on lead bronzes have been mentioned. Elimination of A1203 by different fluxing techniques is described. The use of MgCla flux for Al-Mg alloy sand degassing by chlorine through the introduction of hexachloroethane have been outlined.Grain refinement by boron and titanium has been described
In this paper, the sources, properties and possible applications of waste residues from the aluminum...
© 1961 Dr. Ronald Francis BlanksApplications of the process of differential (or selective) sulphatio...
Molten salt electrolysis is a proven technology for the extraction of metals -- all the world's prim...
The paper describes a desulphurization process developed at the NML which offers high degree of de...
It is apparent that the concentrations of impurities in raw materials (particularly petroleum coke) ...
In general sense, a casting is produced when molten metal is poured into a mould and left to cool an...
Most of the largest manufacturing jewellery companies in the world are located in South East Asia or...
Fluxed iron-oxide pellets were prepared using waste iron oxide fines and lime fines and subsequently...
Low-grade copper concentrates containing increased impurities such as As, Pb, and Zn are used in cop...
The usage of the reduced pressure in the processes of smelting and refining of metal alloys allow to...
The preserce of aluminium is harmful in gunmetal particularly meant for the production of pressure...
A low level of non-metallic inclusions in steel is the key requirement in the concept of clean steel...
The metallurgic treatment of an ore for Lead and Silver…. The discussion of which will consist of th...
As the demand for high quality Aluminum has been increased, the molten metal refining processes in c...
Aluminum alloy cleanliness has been in the limelight during the last three decades and still remains...
In this paper, the sources, properties and possible applications of waste residues from the aluminum...
© 1961 Dr. Ronald Francis BlanksApplications of the process of differential (or selective) sulphatio...
Molten salt electrolysis is a proven technology for the extraction of metals -- all the world's prim...
The paper describes a desulphurization process developed at the NML which offers high degree of de...
It is apparent that the concentrations of impurities in raw materials (particularly petroleum coke) ...
In general sense, a casting is produced when molten metal is poured into a mould and left to cool an...
Most of the largest manufacturing jewellery companies in the world are located in South East Asia or...
Fluxed iron-oxide pellets were prepared using waste iron oxide fines and lime fines and subsequently...
Low-grade copper concentrates containing increased impurities such as As, Pb, and Zn are used in cop...
The usage of the reduced pressure in the processes of smelting and refining of metal alloys allow to...
The preserce of aluminium is harmful in gunmetal particularly meant for the production of pressure...
A low level of non-metallic inclusions in steel is the key requirement in the concept of clean steel...
The metallurgic treatment of an ore for Lead and Silver…. The discussion of which will consist of th...
As the demand for high quality Aluminum has been increased, the molten metal refining processes in c...
Aluminum alloy cleanliness has been in the limelight during the last three decades and still remains...
In this paper, the sources, properties and possible applications of waste residues from the aluminum...
© 1961 Dr. Ronald Francis BlanksApplications of the process of differential (or selective) sulphatio...
Molten salt electrolysis is a proven technology for the extraction of metals -- all the world's prim...