Add to ORKGThe paper reports the results of precipitation behaviour of a commercial Al-Cu alloy containing Li and varying amounts of Mg and an Al-Zn-Mg alloy. The results of solidification from two phase region on precipitation have been compared with alloys cast conventionally. The energies of formation of quenched in vacancies and migration have also been reported. (Shri C.S. Sivaramkrishnan and R.K. Mahanti, National Metallurgical Laboratory
60.00; Translated from Japanese (J. Jpn. Inst. Light Met. 1986 v. 36(11) p. 728-736)SIGLEAvailable f...
The continuous demand of the aerospace industry for structural components with increased power-to-we...
Precipitation behavior and the quenching sensitivity of a spray deposited Al-Zn-Mg-Cu-Zr alloy durin...
The effects of copper and magnesium on the precipitation characteristics of Al-Li-Mg, Al-Li- Cu, and...
A new phase (designated 0) which precipitates in Al-Cu-Mg-Ag alloys having high Cu:Mg ratios, is kno...
International audienceThe precipitation behaviour in an Al-5 wt.% Mg-1.8 wt.% Li alloy has been syst...
Differential Scanning Calorimetry has been used to study the phase transformations in Al-Li-Cu-Mg-Zr...
The effect of Mg content on the solidification and precipitation behaviour of both unmodified and Sr...
The paper presents the research results of the influence of the precipitation hardening on hardness ...
Investigations on the aging hardening behavior of four Al-Li-Zn-Mg-Cu alloys were carried out using ...
In the present study, the effect of varying amounts of copper (Cu) addition on the kinetics of the p...
Microstructures and mechanical properties of Al-5Zn-2.6Mg alloys with 0.24, 0.43, and 0.91 wt.% Cu w...
The influence of the cooling rate on the extent of precipitation hardening of cast aluminum alloy (A...
WOS: 000223176000008Differential scanning calorimetry (DSC) and transmission electron microscopy (TE...
The scope of this work is to investigate the precipitation of two Al-Mg-Si alloys with and without C...
60.00; Translated from Japanese (J. Jpn. Inst. Light Met. 1986 v. 36(11) p. 728-736)SIGLEAvailable f...
The continuous demand of the aerospace industry for structural components with increased power-to-we...
Precipitation behavior and the quenching sensitivity of a spray deposited Al-Zn-Mg-Cu-Zr alloy durin...
The effects of copper and magnesium on the precipitation characteristics of Al-Li-Mg, Al-Li- Cu, and...
A new phase (designated 0) which precipitates in Al-Cu-Mg-Ag alloys having high Cu:Mg ratios, is kno...
International audienceThe precipitation behaviour in an Al-5 wt.% Mg-1.8 wt.% Li alloy has been syst...
Differential Scanning Calorimetry has been used to study the phase transformations in Al-Li-Cu-Mg-Zr...
The effect of Mg content on the solidification and precipitation behaviour of both unmodified and Sr...
The paper presents the research results of the influence of the precipitation hardening on hardness ...
Investigations on the aging hardening behavior of four Al-Li-Zn-Mg-Cu alloys were carried out using ...
In the present study, the effect of varying amounts of copper (Cu) addition on the kinetics of the p...
Microstructures and mechanical properties of Al-5Zn-2.6Mg alloys with 0.24, 0.43, and 0.91 wt.% Cu w...
The influence of the cooling rate on the extent of precipitation hardening of cast aluminum alloy (A...
WOS: 000223176000008Differential scanning calorimetry (DSC) and transmission electron microscopy (TE...
The scope of this work is to investigate the precipitation of two Al-Mg-Si alloys with and without C...
60.00; Translated from Japanese (J. Jpn. Inst. Light Met. 1986 v. 36(11) p. 728-736)SIGLEAvailable f...
The continuous demand of the aerospace industry for structural components with increased power-to-we...
Precipitation behavior and the quenching sensitivity of a spray deposited Al-Zn-Mg-Cu-Zr alloy durin...