Add to ORKGA spectrographic method employing rotating electrode and high voltage A.C. intermittent arc for the determination of boron in steel has been described in this paper. Boron in steel up to a lower limit of 0.001 per cent can be determined by this method with an accuracy of ± 5 percent of the amount present. (Mr. M.K. Ghose, Junior Scientific Officer; Mr. S. Pait, Junior Scientific Assistant; Dr. B.C. Kar, Assistant Director; National Metallurgical Laboratory
Boron is often used as a trace additive in steel in order to control the phase transformation behavi...
The sample is treated with 5N H2SO4 followed by concentrated HNO3 and the diluted mixture is filtere...
Small amounts of niobium, both in mild steel and stainless steel, have been determined by ac intermi...
A method is proposed for boron determination in steels at ppm levels by inductively-coupled plasma s...
Translated from Spanish (Rev. Metal; Madrid 1985 v. 21(2) p. 87-90)Available from British Library Do...
The microamount of boron in iron and steel was determined rapidly by a solvent extraction method. Th...
A simple analytical method for the determination of boron in steeels using a computational technique...
A thesis submitted in partial fulfilment of the requirements of the Council for National Academic Aw...
An experimental study for the determination of boron in steels by inductively coupled plasma atomic ...
An extended study of different sampling introduction approaches using inductively coupled plasma mas...
We consider a new method for hardening the steel surface, which differs from the known CHT boriding ...
SIGLEAvailable from British Library Document Supply Centre- DSC:7762.72268(ESTD/L--0104/R89) / BLDSC...
An alternative mercury-free voltammetric method based on the complexation of boron with alizarin red...
Trabajo presentado en Sixth Internacional Conference on Progress of Analytical Chemistry, celebrado ...
A stabilization of the plasma-jet flame was studied for the use of acid solutions, the apparatus was...
Boron is often used as a trace additive in steel in order to control the phase transformation behavi...
The sample is treated with 5N H2SO4 followed by concentrated HNO3 and the diluted mixture is filtere...
Small amounts of niobium, both in mild steel and stainless steel, have been determined by ac intermi...
A method is proposed for boron determination in steels at ppm levels by inductively-coupled plasma s...
Translated from Spanish (Rev. Metal; Madrid 1985 v. 21(2) p. 87-90)Available from British Library Do...
The microamount of boron in iron and steel was determined rapidly by a solvent extraction method. Th...
A simple analytical method for the determination of boron in steeels using a computational technique...
A thesis submitted in partial fulfilment of the requirements of the Council for National Academic Aw...
An experimental study for the determination of boron in steels by inductively coupled plasma atomic ...
An extended study of different sampling introduction approaches using inductively coupled plasma mas...
We consider a new method for hardening the steel surface, which differs from the known CHT boriding ...
SIGLEAvailable from British Library Document Supply Centre- DSC:7762.72268(ESTD/L--0104/R89) / BLDSC...
An alternative mercury-free voltammetric method based on the complexation of boron with alizarin red...
Trabajo presentado en Sixth Internacional Conference on Progress of Analytical Chemistry, celebrado ...
A stabilization of the plasma-jet flame was studied for the use of acid solutions, the apparatus was...
Boron is often used as a trace additive in steel in order to control the phase transformation behavi...
The sample is treated with 5N H2SO4 followed by concentrated HNO3 and the diluted mixture is filtere...
Small amounts of niobium, both in mild steel and stainless steel, have been determined by ac intermi...