Add to ORKGA low turn-on voltage of polymer light-emitting diode, PLED is important for economical display application. We had fabricated the nanoparticlesTiO2 thin film between ITO and PDPV in Al/PDPV/ITO structure as a hole injection layer. The sol gel method synthesized of TiO2 thin film was deposited using spin coating technique. It was found that TiO2 has reduced the turn-on voltage of the original PLED device from 8.0 V to 5.0 V
Polymer light-emitting diodes(PLEDs) devices based on MEH-PPV were fabricated. The performance of PL...
Using TiO2/G-PEDOT (PEDOT/PSS doped with glycerol) nanocomplex film as a substitute for metal electr...
Organic thin-film transistors (OTFTs) have attracted great interest for low cost electronic devices ...
Improvement on optoelectronic properties of poly (9,9′-di-n-octylfluorenyl-2.7-diyl)- (PFO-) based l...
Highly homogeneous crystalline TiO2 thin films were prepared by spin-coating a TiO2 nanoparticle aqu...
The effect of TiO2 nanoparticle (NP) content on the improvement of poly(9,9′-di-n-octylfluorenyl-2,7...
The characteristics of a hybrid polymer light-emitting diode HPLED with an active layer of poly 2-me...
With the aim of improving the photonic efficiency of an organic light emitting diode (OLED) and its ...
Polymer light-emitting diodes (PLEDs) continue to draw considerable attention as next generation dis...
The characteristics of a hybrid polymer light-emitting diode (HPLED) with an active layer of poly [2...
The influence of SiO2/TiO2 nanocomposites on the performance of organic light-emitting diodes (OLEDs...
Conducting polymers as active layers for LEDs, solar cells, and sensors among others have advantages...
Nanoparticles assembled at the semiconducting polymer/electrode interface affect charge injection in...
The effect of tetrabutylammonium hexafluorophosphate (TBAPF6) doping on the electrical and electrolu...
In order to improve the performance of organic light emitting diodes (OLED), a water-dispersed polya...
Polymer light-emitting diodes(PLEDs) devices based on MEH-PPV were fabricated. The performance of PL...
Using TiO2/G-PEDOT (PEDOT/PSS doped with glycerol) nanocomplex film as a substitute for metal electr...
Organic thin-film transistors (OTFTs) have attracted great interest for low cost electronic devices ...
Improvement on optoelectronic properties of poly (9,9′-di-n-octylfluorenyl-2.7-diyl)- (PFO-) based l...
Highly homogeneous crystalline TiO2 thin films were prepared by spin-coating a TiO2 nanoparticle aqu...
The effect of TiO2 nanoparticle (NP) content on the improvement of poly(9,9′-di-n-octylfluorenyl-2,7...
The characteristics of a hybrid polymer light-emitting diode HPLED with an active layer of poly 2-me...
With the aim of improving the photonic efficiency of an organic light emitting diode (OLED) and its ...
Polymer light-emitting diodes (PLEDs) continue to draw considerable attention as next generation dis...
The characteristics of a hybrid polymer light-emitting diode (HPLED) with an active layer of poly [2...
The influence of SiO2/TiO2 nanocomposites on the performance of organic light-emitting diodes (OLEDs...
Conducting polymers as active layers for LEDs, solar cells, and sensors among others have advantages...
Nanoparticles assembled at the semiconducting polymer/electrode interface affect charge injection in...
The effect of tetrabutylammonium hexafluorophosphate (TBAPF6) doping on the electrical and electrolu...
In order to improve the performance of organic light emitting diodes (OLED), a water-dispersed polya...
Polymer light-emitting diodes(PLEDs) devices based on MEH-PPV were fabricated. The performance of PL...
Using TiO2/G-PEDOT (PEDOT/PSS doped with glycerol) nanocomplex film as a substitute for metal electr...
Organic thin-film transistors (OTFTs) have attracted great interest for low cost electronic devices ...