This studies are directed towards measuring the electrical conductivity of the (CuSe)1-xSex metal chalcogenide semi-conductor composites, with different stoichiometric compositions of Se (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8,1.0) in bulk form. The electrical conductivity measurement was carried out at room temperature, using the parallel plate technique. The (CuSe)1-xSex composites were prepared using solid state reaction, by varying the ratio of CuSe:Se, in the reaction mixture. The electrical conductivity of (CuSe)1-xSex was determined to be in the range of 1.17 x 10-8 to 1.02 x 10-1 S/cm. The finding indicated that the electrical conductivity value tended to decrease as the concentration of Se increased. The effect of the concentration of Se, ...
Results of the d. c. electrical conductivity (6) measurements (from 90 to 420K) on13; fifteen glass ...
There are several absorber layer have been developed for solar cell application such as CdTe, CIGS ...
The aim of the work was to obtain copper (I) selenide Cu2Se material with excellent thermoelectric p...
This studies are directed towards measuring the electrical conductivity of the (CuSe)1-xSex metal ch...
This paper reports the structural and electrical conductivity characterization of the copper selenid...
This paper reports the structural and electrical conductivity characterization of the copper selenid...
This paper reports the structural and electrical conductivity characterization of the copper selenid...
This paper reports the preparation and the characterization of the (CuSe)1−xSex metal chalcogenide s...
Abstract. The electrical conductivity, , and the thermoelectric power, S, have been measured for mol...
661-667DC electrical properties of the system Se100-X InX (where x =5, 10, 15 and 20 at. %) have ...
Copper selenide (CuSe) nanoparticles were successfully prepared via chemical precipitation method at...
Abstract. The I–V characterization and the electrical resistivity of selenium rich Se85Cd15–xZnx (x ...
In the last decade, high-performance CuSe thermoelectric materials and devices are attracting increa...
Quaternary chalcogenide semiconductor has attracted much attention as absorber-layer materials in so...
Cd5Se95−xZnx (x = 0, 2, 4, 6) chalcogenide semiconductors were prepared by conventional melt-quenchi...
Results of the d. c. electrical conductivity (6) measurements (from 90 to 420K) on13; fifteen glass ...
There are several absorber layer have been developed for solar cell application such as CdTe, CIGS ...
The aim of the work was to obtain copper (I) selenide Cu2Se material with excellent thermoelectric p...
This studies are directed towards measuring the electrical conductivity of the (CuSe)1-xSex metal ch...
This paper reports the structural and electrical conductivity characterization of the copper selenid...
This paper reports the structural and electrical conductivity characterization of the copper selenid...
This paper reports the structural and electrical conductivity characterization of the copper selenid...
This paper reports the preparation and the characterization of the (CuSe)1−xSex metal chalcogenide s...
Abstract. The electrical conductivity, , and the thermoelectric power, S, have been measured for mol...
661-667DC electrical properties of the system Se100-X InX (where x =5, 10, 15 and 20 at. %) have ...
Copper selenide (CuSe) nanoparticles were successfully prepared via chemical precipitation method at...
Abstract. The I–V characterization and the electrical resistivity of selenium rich Se85Cd15–xZnx (x ...
In the last decade, high-performance CuSe thermoelectric materials and devices are attracting increa...
Quaternary chalcogenide semiconductor has attracted much attention as absorber-layer materials in so...
Cd5Se95−xZnx (x = 0, 2, 4, 6) chalcogenide semiconductors were prepared by conventional melt-quenchi...
Results of the d. c. electrical conductivity (6) measurements (from 90 to 420K) on13; fifteen glass ...
There are several absorber layer have been developed for solar cell application such as CdTe, CIGS ...
The aim of the work was to obtain copper (I) selenide Cu2Se material with excellent thermoelectric p...