Add to ORKGOne of the two ILC Interaction Regions will have a large horizontal crossing angle which would allow to extract the spent beams in a separate beam line. In this paper, the extraction line design for 20 mrad crossing angle is presented. This beam line transports the primary e+/e- and beam-strahlung photon beams from the IP to a common dump, and includes diagnostic section for energy and polarization measurements. The optics is designed for a large energy acceptance to minimize losses in the low energy tail of the disrupted beam. The extraction optics, diagnostic instrumentation and particle tracking simulations are described. © 2005 IEEE
The authors have performed a detailed study of the power losses in the post-collision extraction lin...
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline c...
In this paper, we perform a detailed study of the power losses along the postcollision extraction li...
One of the two ILC Interaction Regions will have a large horizontal crossing angle which would allow...
One of the two ILC Interaction Regions will have a large horizontal crossing angle which would allow...
The studies of the ILC extraction line design have been carried out by the SLAC-BNL-UK-France task f...
The ILC design [1] is based on a single Interaction Region (IR) with 14 mrad crossing angle and two ...
The ILC design [1] is based on a single Interaction Region (IR) with 14 mrad cross-ing angle and two...
The ILC extraction line for 2 mrad crossing angle is under development by the SLAC-BNL-UK-France tas...
A complete optics design for the 2mrad crossing angle interaction region and extraction line was pre...
In this memo we present the optical parameters of the new extraction line for the 2mrad crossing ang...
Abstract The ILC [1] Damping Ring to the Main Linac beamline (RTML) contains three extraction lines ...
The earlier studies of the ILC extraction line for 20 mrad and 2 mrad crossing angle options [1]-[5]...
In this memo we present the optical parameters of the new extraction line for the 2mrad crossing ang...
The use of single stage bunch compressor (BC) in the International Linear Collider (ILC) Damping Rin...
The authors have performed a detailed study of the power losses in the post-collision extraction lin...
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline c...
In this paper, we perform a detailed study of the power losses along the postcollision extraction li...
One of the two ILC Interaction Regions will have a large horizontal crossing angle which would allow...
One of the two ILC Interaction Regions will have a large horizontal crossing angle which would allow...
The studies of the ILC extraction line design have been carried out by the SLAC-BNL-UK-France task f...
The ILC design [1] is based on a single Interaction Region (IR) with 14 mrad crossing angle and two ...
The ILC design [1] is based on a single Interaction Region (IR) with 14 mrad cross-ing angle and two...
The ILC extraction line for 2 mrad crossing angle is under development by the SLAC-BNL-UK-France tas...
A complete optics design for the 2mrad crossing angle interaction region and extraction line was pre...
In this memo we present the optical parameters of the new extraction line for the 2mrad crossing ang...
Abstract The ILC [1] Damping Ring to the Main Linac beamline (RTML) contains three extraction lines ...
The earlier studies of the ILC extraction line for 20 mrad and 2 mrad crossing angle options [1]-[5]...
In this memo we present the optical parameters of the new extraction line for the 2mrad crossing ang...
The use of single stage bunch compressor (BC) in the International Linear Collider (ILC) Damping Rin...
The authors have performed a detailed study of the power losses in the post-collision extraction lin...
An interaction region (IR) with head-on collisions is considered as an alternative to the baseline c...
In this paper, we perform a detailed study of the power losses along the postcollision extraction li...