Modelling of shale rock pore structure based on gas adsorption

Shale rock consists of a complex matrix structure due to presence of nano-scale pores. Owing to such complexity determination and/or prediction of the mineralogical, mechanical, and petrophysical properties (e.g., permeability, porosity, pore size distribution, etc.) of shale is a challenging task. A preliminary estimation of these properties is essential before shale gas exploration. In this study, experimental and numerical analyses are conducted to estimate the permeability, porosity, and pore size distribution of a typical shale sample. Gas adsorption experiments were conducted to characterize the pore spaces of the shale via analysing the isotherms. Using conventional theories, such as BET and BJH methods, surface area, pore volume, and pore size distributions were estimated. On the other hand, gross porosity of the shale samples was measured by conducting gas pycnometry experiment. Finally based on the obtained results an equivalent pore network model is constructed which accounts for the pore size distributions and low pore connectivity in the shale matrix. We have simulated gas flow through the network to estimate permeability of the shale. This model considers Knudsen diffusion and the effects of gas slippage on permeability. Further parametric study shows that the apparent permeability primarily depends on the reservoir pressure, pore coordination number and porosity