Sythesis of bioavture through hydrodeoxygenation and catalytic cracking from oleic acid using NiMo/Zeolit catalyst

Currently, fossil fuels are still the primary source of fuel. As has been known, fossil fuel especially aviation fuel is limited resources and can increase greenhouse gas emissions. This condition encourages replacement efforts of avture into bioavture fuel. In this research, bioavture is synthesized through hydrodeoxygenation and catalytic cracking from oleic acid as a model compound using NiMo/Zeolite catalyst. Hydrodeoxygenation carried out under operating conditions: at temperature of 375°C, under 15 bar pressure and for 2.5 hours. The chain of hydrocarbons from the result of hydrodeoxygenation has been cracked by catalytic cracking reaction for 1.5 hours. Variation operating condition used are 360, 375, and 390°C. The liquid product is tested its chemical characteristic, ie acid number, FTIR and GC-MS and its physical characteristics, ie density test and viscosity. Bioavtur that synthesized by catalytic cracking have met the specifications of bioavtur, except the acid number with optimum temperature at 375oC. These conditions with NiMo/Zeolite activated led to dominant yield of 36.32%, selectivity of 38.05%, and conversion of 84.30%. Percentage of yield and selectivity of bioavtur are still low caused by performance of catalyst that is still can not optimum. While, high percentage of conversion caused by high temperature used for catalytic cracking