An experimental study on hydrogen sulphide (H2S) adsorption behaviours using amine-impregnated solid adsorbent (GAC/PEI) was carried out for H2S concentration in the range of 200 and 400 ppm. The dynamic adsorptions of GAC and modified GAC (2.0 and 1000 g/L PEI) in a fixed-bed column were investigated by determining the breakthrough curves and adsorption capacities of various adsorbents. The adsorbent exhibits an excellent adsorption capacity of 106.87 and 231.45 mgH2S/g-adsorbent for 200 ppm and 400 ppm H2S, respectively. The H2S breakthrough capacity is found to relate to the surface adsorption and chemical adsorption
Mercury is one of the most toxic metals present in the environment. Adsorption has been proposed amo...
Adsorption of H2S and the influence of steam on its adsorption capacity and kinetics were studied on...
During the tenth quarter of the project, bench scale experiments were performed to investigate the a...
An experimental study on hydrogen sulphide (H2S) adsorption behaviours using amine-impregnated solid...
In this study., a sodium carbonate impregnated activated carbon (IAC) was applied as the adsorbent f...
The use of adsorption technology to remove H2S from synthetic gas (H2S and N2) using a goethite-base...
Adsorption technology has led to the development of promising techniques to purify biogas, i.e., bio...
Based on the concept of industrial ecology, this study investigated the interaction between hydrogen...
Adsorption technology has led to the development of promising techniques to purify biogas, i.e., bio...
Activated carbon was prepared from black liquor by steam activation. The BET specific surface area, ...
Biogas is one type of renewable energy which can be burnt to produce heat and electricity. However, ...
Abstract Hydrogen sulfide (H2S) is an environmentally hazardous, corrosive, and toxic gas, mostly ...
The effects of treatment of an activated carbon with Sulphur precursors on its textural properties a...
The deposition of elemental sulfur on porous adsorbents (commercial pre-sulfurised activated carbons...
In this work the attention was focused on the adsorption of mercuric chloride on activated carbon an...
Mercury is one of the most toxic metals present in the environment. Adsorption has been proposed amo...
Adsorption of H2S and the influence of steam on its adsorption capacity and kinetics were studied on...
During the tenth quarter of the project, bench scale experiments were performed to investigate the a...
An experimental study on hydrogen sulphide (H2S) adsorption behaviours using amine-impregnated solid...
In this study., a sodium carbonate impregnated activated carbon (IAC) was applied as the adsorbent f...
The use of adsorption technology to remove H2S from synthetic gas (H2S and N2) using a goethite-base...
Adsorption technology has led to the development of promising techniques to purify biogas, i.e., bio...
Based on the concept of industrial ecology, this study investigated the interaction between hydrogen...
Adsorption technology has led to the development of promising techniques to purify biogas, i.e., bio...
Activated carbon was prepared from black liquor by steam activation. The BET specific surface area, ...
Biogas is one type of renewable energy which can be burnt to produce heat and electricity. However, ...
Abstract Hydrogen sulfide (H2S) is an environmentally hazardous, corrosive, and toxic gas, mostly ...
The effects of treatment of an activated carbon with Sulphur precursors on its textural properties a...
The deposition of elemental sulfur on porous adsorbents (commercial pre-sulfurised activated carbons...
In this work the attention was focused on the adsorption of mercuric chloride on activated carbon an...
Mercury is one of the most toxic metals present in the environment. Adsorption has been proposed amo...
Adsorption of H2S and the influence of steam on its adsorption capacity and kinetics were studied on...
During the tenth quarter of the project, bench scale experiments were performed to investigate the a...