Polymer additives are widely used to improve the performances of road bitumen and mixtures including their oxidative resistance. However, their effect on the oxidative mechanism remains unclear. This study includes the investigation of the changes in the rheological response of Polymer Modified Bitumen (PMBs) prepared with the Styrene Butadiene Styrene (SBS) copolymer and Sulphur as cross-linker. The bitumen samples were aged in the Rolling Thin Film Oven (RTFO) and in multiple cycles of Pressure Aging Vessel (PAV). The rheological properties were measured by means of the Multiple Stress Creep and Recovery (MSCR) test. Results show that in the case of cross-linked SBS modified bitumen the polymer phase mitigates the effect of hardening of t...
The aim of this research was to define the effect of oxidative aging on the chemical and rheological...
A wide variety of polymer additives have been widely used in recent years. However, the effect of di...
Polymer modified bitumen (PMB) is used extensively in thin asphalt surfacing and seals in order toim...
Polymer additives are widely used to improve the performances of road bitumen and mixtures including...
Polymer additives are widely used to improve the performance of road bitumens including their 12 Mic...
Polymer additives are widely used to improve the performances of road bitumens. However, although th...
The study investigated the aging properties of modified bitumen penetration grade PG 76-22 (binder)....
Polymer additives are used to improve the properties of road bitumens including their oxidative resi...
Ageing of bitumen is an important cause of reduced durability of asphalt pavements. Therefore, the p...
To obtain road bitumen with improved temperature and fatigue resistance, polymers and/or rubbers cou...
WOS: 000313767900034The effects of styrene-butadiene-styrene (SBS) and SBS with new reactive terpoly...
Bitumen undergoes ageing, which leads to changes in its chemical and rheological properties, causing...
The aim of this research was to define the effect of oxidative aging on the chemical and rheological...
A wide variety of polymer additives have been widely used in recent years. However, the effect of di...
Polymer modified bitumen (PMB) is used extensively in thin asphalt surfacing and seals in order toim...
Polymer additives are widely used to improve the performances of road bitumen and mixtures including...
Polymer additives are widely used to improve the performance of road bitumens including their 12 Mic...
Polymer additives are widely used to improve the performances of road bitumens. However, although th...
The study investigated the aging properties of modified bitumen penetration grade PG 76-22 (binder)....
Polymer additives are used to improve the properties of road bitumens including their oxidative resi...
Ageing of bitumen is an important cause of reduced durability of asphalt pavements. Therefore, the p...
To obtain road bitumen with improved temperature and fatigue resistance, polymers and/or rubbers cou...
WOS: 000313767900034The effects of styrene-butadiene-styrene (SBS) and SBS with new reactive terpoly...
Bitumen undergoes ageing, which leads to changes in its chemical and rheological properties, causing...
The aim of this research was to define the effect of oxidative aging on the chemical and rheological...
A wide variety of polymer additives have been widely used in recent years. However, the effect of di...
Polymer modified bitumen (PMB) is used extensively in thin asphalt surfacing and seals in order toim...