Study on AC Resistance of Layering Enamelled Stranded Conductor

In recent years, with the rapid development of large-length ultra-high-pressure voltage extrusion insulated submarine cable technology, the cable system in the medium-length offshore power grid interconnection project has been gradually replaced by XLPE insulation by traditional oil-paper insulation. There are many large cross-section conductors used in long-distance power transmission cables, and according to the IEC 60287-1-1, it is recommended to use Milliken conductors to reduce the AC resistance of conductors, at the same time, in submarine cables, there is a high requirement on the water-blocking performance of conductors and the water resistance of Milliken conductors is poor, so it is not used in submarine cable conductors. This paper puts forward a layering enamelled stranded conductor and a calculation method of AC / DC resistance ratio for it. The validity of the calculation method is verified by experimental tests. At the same time, the calculation shows that the AC / DC resistance of the conductor at 1800 mm2 nominal cross section can be reduced by 16% compared with the conventional round compacted conductor in the prior art. The effectiveness of this conductor in reducing AC resistance is verified by finite element simulation