Low temperature β internal friction peak evolution upon thermal cycles shows two peculiar peaks similar to high temperature internal friction peak. The modulus softening associated to these peaks suggest a phase transformation phenomenon and the relaxation time τo in order of 10-23–10-35s, close to that observed in grains boundary sliding are due to interface motions in the amorphous structure under combined thermal and mechanical energies
cited By 0International audienceThe mechanical relaxation characteristics of in-situ Ti48Zr20V12Cu5B...
The effects of cooling rate, temperature, and applied strain rate on the tensile deformation behavio...
RdsumB- La technique du frottement intcrieur 2 basse frdquence(1Hz)a 6td utilisde afin d'dtudie...
Low temperature β internal friction peak evolution upon thermal cycles shows two peculiar peaks simi...
The internal friction patterns of Zr57Al10Ni12.4Cu15.6Nb5 bulk metallic glass (BMG) were investigate...
The dynamic elastic modulus and internal friction of metallic glasses was measured by a torsional pe...
International audienceRelaxation of internal friction of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass was ...
Temperature dependent Young's modulus, shear modulus and the related internal frictions of Zr41.2Ti1...
The intemal friction and the rigidity modulus of an amorphous Zr67Fe33 alloy have been measured in a...
On a étudié le frottement interne /FI/ et le module de torsion en fonction de température dans l'all...
Internal friction, dynamic elastic modulus and micro-hardness were measured on FeCoNiCrBSi amorphous...
Precise low-frequency internal friction measurements on vitreous silica, taken over a wide temperatu...
cited By 5International audienceThe dynamic mechanical relaxation behaviour of Zr50Cu40Al10 bulk met...
International audienceHigh temperature deformation of a ZrTiCuNiBe bulk metallic glass (BMG) is inve...
The measurements were made in a torsional pendulum at about 0.1 cps using longitudinal stress (5 - 1...
cited By 0International audienceThe mechanical relaxation characteristics of in-situ Ti48Zr20V12Cu5B...
The effects of cooling rate, temperature, and applied strain rate on the tensile deformation behavio...
RdsumB- La technique du frottement intcrieur 2 basse frdquence(1Hz)a 6td utilisde afin d'dtudie...
Low temperature β internal friction peak evolution upon thermal cycles shows two peculiar peaks simi...
The internal friction patterns of Zr57Al10Ni12.4Cu15.6Nb5 bulk metallic glass (BMG) were investigate...
The dynamic elastic modulus and internal friction of metallic glasses was measured by a torsional pe...
International audienceRelaxation of internal friction of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass was ...
Temperature dependent Young's modulus, shear modulus and the related internal frictions of Zr41.2Ti1...
The intemal friction and the rigidity modulus of an amorphous Zr67Fe33 alloy have been measured in a...
On a étudié le frottement interne /FI/ et le module de torsion en fonction de température dans l'all...
Internal friction, dynamic elastic modulus and micro-hardness were measured on FeCoNiCrBSi amorphous...
Precise low-frequency internal friction measurements on vitreous silica, taken over a wide temperatu...
cited By 5International audienceThe dynamic mechanical relaxation behaviour of Zr50Cu40Al10 bulk met...
International audienceHigh temperature deformation of a ZrTiCuNiBe bulk metallic glass (BMG) is inve...
The measurements were made in a torsional pendulum at about 0.1 cps using longitudinal stress (5 - 1...
cited By 0International audienceThe mechanical relaxation characteristics of in-situ Ti48Zr20V12Cu5B...
The effects of cooling rate, temperature, and applied strain rate on the tensile deformation behavio...
RdsumB- La technique du frottement intcrieur 2 basse frdquence(1Hz)a 6td utilisde afin d'dtudie...