The inhomogeneous character of phase transformations in the quenched cold-rolled alloy Zr - 20%Nb was investigated using new X-ray diffractometric procedures based on a position sensitive detector. It was shown that the distribution of strain hardening in β-grains with different orientations controls the development of phase transformation β→α and β→ω in the rolled alloy. Derivative phases inherit the substructure inhomogenity of the β-phase, i.e. their grains are most dispersive and/or have the most distorted crystalline lattice in texture minima, where both phase transformations develop primarily. To explain the obtained X-ray texture data a mechanism was suggested involving local formation of quasi-amorphous boundary interlayers by cold ...
Zirconium alloys which exhibit practically all possible solid state phase transformations offer some...
AbstractThe evolution of microstructure and texture of an α-Zr alloy during thermomechanical process...
In situ neutron diffraction loading experiments were carried out on a cold-rolled dual-phase (α-phas...
Development of β → ω and β → α phase transformations in the rolled quenched alloy Zr-20%Nb was stud...
In the present study, two distinct starting microstructures of Zr-2.5 wt% Nb have been used: (1) sin...
The formation of a plate shaped ω phase in Zr-Nb alloy after shock deformation has been studied...
Edited by EDP SciencesInternational audienceZirconium alloys are particularly important materials in...
Massive transformation, as a non-conventional solid-state phase transformation mode, is scarcely obs...
A wave of local plastic deformation moves in front of any crack and is responsible for strain harden...
A preprint of a journal paper submitted to Acta Materialia on 7th May 2020. Abstract: The in-servic...
Two phase Zr - 2(.)5 wt-%Nb is used as pressure tube material in water cooled and moderated reactors...
Abstract. A wave of local plastic deformation moves in front of any crack and is responsible for str...
Deformed/pilgered two-phase, 10-15% cubic second phase - rest being primary hexagonal phase, Zr-2.5 ...
Evolution of texture during cold rolling of austenitic AISI 304 stainless steel is presented here. T...
Dilatometry, x-ray diffraction, hardness, and optical microscopy were used to characterize polycryst...
Zirconium alloys which exhibit practically all possible solid state phase transformations offer some...
AbstractThe evolution of microstructure and texture of an α-Zr alloy during thermomechanical process...
In situ neutron diffraction loading experiments were carried out on a cold-rolled dual-phase (α-phas...
Development of β → ω and β → α phase transformations in the rolled quenched alloy Zr-20%Nb was stud...
In the present study, two distinct starting microstructures of Zr-2.5 wt% Nb have been used: (1) sin...
The formation of a plate shaped ω phase in Zr-Nb alloy after shock deformation has been studied...
Edited by EDP SciencesInternational audienceZirconium alloys are particularly important materials in...
Massive transformation, as a non-conventional solid-state phase transformation mode, is scarcely obs...
A wave of local plastic deformation moves in front of any crack and is responsible for strain harden...
A preprint of a journal paper submitted to Acta Materialia on 7th May 2020. Abstract: The in-servic...
Two phase Zr - 2(.)5 wt-%Nb is used as pressure tube material in water cooled and moderated reactors...
Abstract. A wave of local plastic deformation moves in front of any crack and is responsible for str...
Deformed/pilgered two-phase, 10-15% cubic second phase - rest being primary hexagonal phase, Zr-2.5 ...
Evolution of texture during cold rolling of austenitic AISI 304 stainless steel is presented here. T...
Dilatometry, x-ray diffraction, hardness, and optical microscopy were used to characterize polycryst...
Zirconium alloys which exhibit practically all possible solid state phase transformations offer some...
AbstractThe evolution of microstructure and texture of an α-Zr alloy during thermomechanical process...
In situ neutron diffraction loading experiments were carried out on a cold-rolled dual-phase (α-phas...