CAST Pr-Fe-B-Cu magnets, which were hot-pressed so as to yield magnetic alignment, are found to be composed primarily of a Pr2Fe14B and also show traces of a Pr-rich phase. The magnetic Pr2Fe14B phase is concentrated by discharging the Pr-rich phase during hot-pressing. It is found Cu exists mainly in the Pr-rich phase and lowers the melting point of it. The lowered melting point greatly improves the ability of plastic deformation
X-ray diffraction analysis, scanning electron microscopy, and atomic force microscopy are used to st...
Structural and intrinsic properties of R14Fe78C8 alloys, where R = Pr, Nd, and Sm, were studied expe...
International audienceNdFeB alloys for permanent magnets are produced by the strip cast process whic...
The direct use of an advanced binder-free additive manufacturing technique, namely laser powder bed ...
To form the fine micro-structures, the Pr17Fe78B5 magnet powders were produced in the optimized gas ...
The rod specimens were produced from Pr9Fe50 + xCo13Zr1Nb4B23 – x (x = 0, 5, 8) alloys using the suc...
The hard magnetic materials Pr(13.5)Fe(80.6-x)CO(x)G(0.4)B(5.5) (x=0, 2, 4, 8 and 15) have been prep...
Made available in DSpace on 2014-10-09T12:37:45Z (GMT). No. of bitstreams: 0Made available in DSpace...
The correlation between the grain refining effect of TiC on the microstructure of Pr2Co14B melt-spun...
In the present work the phase constitution, microstructure and magnetic properties of the Pr9Fe52Co1...
Microstructures and magnetic properties of Pr-Fe-Co-B bonded magnets were investigated. The magnets ...
The scientific goal of this work is to investigate hard magnetic alloys based on Nd Fe B for the pro...
A new magnetic phase has been observed in as-cast and melt-spun Nd-Fe and Pr-Fe alloys with a Curie ...
The magnetization reversal processes in magnets derived from rapidly solidified Pr9Fe52Co13Zr1Nb4B21...
We have investigated the changes in the magnetic, phase-transformation and microstructural propertie...
X-ray diffraction analysis, scanning electron microscopy, and atomic force microscopy are used to st...
Structural and intrinsic properties of R14Fe78C8 alloys, where R = Pr, Nd, and Sm, were studied expe...
International audienceNdFeB alloys for permanent magnets are produced by the strip cast process whic...
The direct use of an advanced binder-free additive manufacturing technique, namely laser powder bed ...
To form the fine micro-structures, the Pr17Fe78B5 magnet powders were produced in the optimized gas ...
The rod specimens were produced from Pr9Fe50 + xCo13Zr1Nb4B23 – x (x = 0, 5, 8) alloys using the suc...
The hard magnetic materials Pr(13.5)Fe(80.6-x)CO(x)G(0.4)B(5.5) (x=0, 2, 4, 8 and 15) have been prep...
Made available in DSpace on 2014-10-09T12:37:45Z (GMT). No. of bitstreams: 0Made available in DSpace...
The correlation between the grain refining effect of TiC on the microstructure of Pr2Co14B melt-spun...
In the present work the phase constitution, microstructure and magnetic properties of the Pr9Fe52Co1...
Microstructures and magnetic properties of Pr-Fe-Co-B bonded magnets were investigated. The magnets ...
The scientific goal of this work is to investigate hard magnetic alloys based on Nd Fe B for the pro...
A new magnetic phase has been observed in as-cast and melt-spun Nd-Fe and Pr-Fe alloys with a Curie ...
The magnetization reversal processes in magnets derived from rapidly solidified Pr9Fe52Co13Zr1Nb4B21...
We have investigated the changes in the magnetic, phase-transformation and microstructural propertie...
X-ray diffraction analysis, scanning electron microscopy, and atomic force microscopy are used to st...
Structural and intrinsic properties of R14Fe78C8 alloys, where R = Pr, Nd, and Sm, were studied expe...
International audienceNdFeB alloys for permanent magnets are produced by the strip cast process whic...
DOI
Add to ORKG