This study presents water distribution analysis of the device for spraying cooling water through specific nozzles numerically and experimentally. Numerical analysis was performed using the 3-D incompressible, multi-phase flow model, for different Reynolds numbers of 4 × 105, 8 × 105. Experimental analysis was performed at real-size, under the same conditions. The calculated results and the measured results for the distribution of flow were matched relatively well. The distribution of the nozzle flow depends on the Reynolds number
Hybrid cooling is a promising technology to improve the performance of natural draft dry cooling tow...
The present work is aimed at providing a thorough characterization of the spray produced by a water-...
In grinding, the high frictional energy is converted into heat, which may cause thermal damage and d...
This study presents water distribution analysis of the device for spraying cooling water through spe...
Water distribution characteristics of spray nozzles with spray plates used to distribute cooling wat...
An experimental study has been carried out on the water distribution system of a 160 m3/hr pilot coo...
International audienceEvaporative spray cooling is widely used to increase heat transfer of air exch...
This analytical study is based on the results from hydraulic tests of spray nozzles for the mixing (...
International audienceThe water spray systems are widely used for fire safety area and is a well-est...
Abstract: High pressure descaling nozzles are used mainly for removing oxides from hot steel product...
© 2015 Elsevier Ltd. All rights reserved. A natural draft dry cooling tower rejects heat in a power ...
In hydraulic elements an under-pressure is generated during fluid flow around sharp edges or changin...
International audienceThe hose reel gun irrigation system is the most popular in Europe. To improve ...
High pressure descaling nozzles are used mainly for removing oxides from hot steel products. The hom...
The purpose of this work was to develop a method with which to measure the spray distribution from a...
Hybrid cooling is a promising technology to improve the performance of natural draft dry cooling tow...
The present work is aimed at providing a thorough characterization of the spray produced by a water-...
In grinding, the high frictional energy is converted into heat, which may cause thermal damage and d...
This study presents water distribution analysis of the device for spraying cooling water through spe...
Water distribution characteristics of spray nozzles with spray plates used to distribute cooling wat...
An experimental study has been carried out on the water distribution system of a 160 m3/hr pilot coo...
International audienceEvaporative spray cooling is widely used to increase heat transfer of air exch...
This analytical study is based on the results from hydraulic tests of spray nozzles for the mixing (...
International audienceThe water spray systems are widely used for fire safety area and is a well-est...
Abstract: High pressure descaling nozzles are used mainly for removing oxides from hot steel product...
© 2015 Elsevier Ltd. All rights reserved. A natural draft dry cooling tower rejects heat in a power ...
In hydraulic elements an under-pressure is generated during fluid flow around sharp edges or changin...
International audienceThe hose reel gun irrigation system is the most popular in Europe. To improve ...
High pressure descaling nozzles are used mainly for removing oxides from hot steel products. The hom...
The purpose of this work was to develop a method with which to measure the spray distribution from a...
Hybrid cooling is a promising technology to improve the performance of natural draft dry cooling tow...
The present work is aimed at providing a thorough characterization of the spray produced by a water-...
In grinding, the high frictional energy is converted into heat, which may cause thermal damage and d...