Structural relaxation in FeSiB-CuNb alloys is studied from enthalpic and Curie temperature effects. Enthalpy release and Curie temperature changes can be fitted to an exponential behaviour as a function of the annealing time by using two different relaxation times. For ribbons melt-spun at different wheel speed, no significant differences in structural relaxation behaviour are found
The three-component amorphous alloy Fe80Si10B10 was prepared on the surface of copper roller by rapi...
In the present work, we study the influence of thermal treatments on the magnetic properties of as-q...
cited By 52International audienceStructural relaxation process in Cu46Zr45Al 7Y2 and Zr55Cu30Ni 5Al1...
Structural relaxation in FeSiB-CuNb alloys is studied from enthalpic and Curie temperature effects. ...
Differential scanning calorimetry and dynamic differential scanning calorimetry were used to analyze...
The magnetic and structural characteristics of FeSiBCuNb alloys have been studied for samples submit...
The Irreversible component of the structural relaxation in two ferromagnetic amorphous alloys Fe78Si...
A Fe-Cr-C-P-Si metallic glass was produced by melt-spinning technique with various rates of the rota...
In this paper a DSC study is reported of the behavior of Fe40Ni40P14B6 alloy produced by rapid quenc...
La relaxation structurale d'un verre métallique trempé a été étudiée par mesure de la température de...
Structural relaxation behavior of a rapidly quenched (RQ) and a slowly cooled Pd40Cu30Ni10P20 metall...
The microstructure and magnetic properties i.e. the initial permeability, magnetic after-effect and ...
The stress and annealing dependence of the Curie temperature in FeZrBCu alloys is presented. A chang...
Fast cooling of 106 K/s, according to the melt-spinning method, led to the Fe73.5Cu1Nb3Si15.5B7 amor...
The anneal-induced enthalpy relaxation behavior was examined calorimetrically for amorphous alloys o...
The three-component amorphous alloy Fe80Si10B10 was prepared on the surface of copper roller by rapi...
In the present work, we study the influence of thermal treatments on the magnetic properties of as-q...
cited By 52International audienceStructural relaxation process in Cu46Zr45Al 7Y2 and Zr55Cu30Ni 5Al1...
Structural relaxation in FeSiB-CuNb alloys is studied from enthalpic and Curie temperature effects. ...
Differential scanning calorimetry and dynamic differential scanning calorimetry were used to analyze...
The magnetic and structural characteristics of FeSiBCuNb alloys have been studied for samples submit...
The Irreversible component of the structural relaxation in two ferromagnetic amorphous alloys Fe78Si...
A Fe-Cr-C-P-Si metallic glass was produced by melt-spinning technique with various rates of the rota...
In this paper a DSC study is reported of the behavior of Fe40Ni40P14B6 alloy produced by rapid quenc...
La relaxation structurale d'un verre métallique trempé a été étudiée par mesure de la température de...
Structural relaxation behavior of a rapidly quenched (RQ) and a slowly cooled Pd40Cu30Ni10P20 metall...
The microstructure and magnetic properties i.e. the initial permeability, magnetic after-effect and ...
The stress and annealing dependence of the Curie temperature in FeZrBCu alloys is presented. A chang...
Fast cooling of 106 K/s, according to the melt-spinning method, led to the Fe73.5Cu1Nb3Si15.5B7 amor...
The anneal-induced enthalpy relaxation behavior was examined calorimetrically for amorphous alloys o...
The three-component amorphous alloy Fe80Si10B10 was prepared on the surface of copper roller by rapi...
In the present work, we study the influence of thermal treatments on the magnetic properties of as-q...
cited By 52International audienceStructural relaxation process in Cu46Zr45Al 7Y2 and Zr55Cu30Ni 5Al1...